# Samsung Washing machine Cb / C6 error Canonical page: https://getfixfault.com/guides/samsung-washer-cb-c6-additional-code AI-readable URL: https://getfixfault.com/guides/samsung-washer-cb-c6-additional-code.txt Last reviewed: 2026-08-07 ## Direct answer Samsung Washing machine Cb / C6: the washer is in calibration mode. This interpretation applies to Samsung washing-machine models covered by the linked US washing-machine error-code article in United States / English. ## Exact scope - Brand: Samsung - Appliance: Washing machine - Error code or indicator: Cb / C6 - Model scope: Samsung washing-machine models covered by the linked US washing-machine error-code article - Region: United States / English ## What users may observe - Cb / C6 is shown on the Samsung washing machine display, indicator, or connected app - The published condition is: the washer is in calibration mode - The controls show the documented lock, pause, or setting state until the exact published control action is completed - If operation no longer matches that description, record the new symptom instead of treating the normal Cb / C6 state as the diagnosis ## Causes or fault boundaries - Manufacturer-defined fault area — the washer is in calibration mode - Cb / C6 does not prove a failed control board while the documented control state is active - Model boundary — apply this interpretation only to Samsung washing-machine models covered by the linked US washing-machine error-code article ## Verified diagnosis - Photograph the complete Cb / C6 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Samsung washing-machine models covered by the linked US washing-machine error-code article - Confirm that the observed condition matches the published meaning: the washer is in calibration mode - Published check — Remove all laundry and follow the exact model calibration procedure - Published check — this display is not automatically a failed-part diagnosis - Treat Cb / C6 as normal only while the observed operation matches “the washer is in calibration mode” - a different symptom needs separate diagnosis - Published check — No component repair is indicated while Cb / C6 remains the documented status “the washer is in calibration mode” - Treat Cb / C6 as normal only while the observed operation matches “the washer is in calibration mode”; a different symptom needs separate diagnosis ## Evidence-backed actions - Remove all laundry and follow the exact model calibration procedure - this display is not automatically a failed-part diagnosis - No component repair is indicated while Cb / C6 remains the documented status “the washer is in calibration mode” ## Safety boundary Follow the exact model manual. Remove all laundry and follow the exact model calibration procedure; this display is not automatically a failed-part diagnosis. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Samsung US washing-machine error-code support - Source URL: https://www.samsung.com/us/support/troubleshoot/TSG10000997/ - Source checked: 2026-08-07 - Procedure verified: 2026-08-07 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.