# Samsung Washing machine SDC / 5DC error Canonical page: https://getfixfault.com/guides/samsung-washer-sdc-5dc-additional-code AI-readable URL: https://getfixfault.com/guides/samsung-washer-sdc-5dc-additional-code.txt Last reviewed: 2026-08-07 ## Direct answer Samsung Washing machine SDC / 5DC: the detergent drawer is not fully closed. This interpretation applies to Samsung washing-machine models covered by the linked US washing-machine error-code article in United States / English. ## Exact scope - Brand: Samsung - Appliance: Washing machine - Error code or indicator: SDC / 5DC - Model scope: Samsung washing-machine models covered by the linked US washing-machine error-code article - Region: United States / English ## What users may observe - SDC / 5DC is shown on the Samsung washing machine display, indicator, or connected app - The published condition is: the detergent drawer is not fully closed - The specified consumable level or setting remains outside the documented state - The important observation is when SDC / 5DC appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — the detergent drawer is not fully closed - SDC / 5DC does not identify an internal failed part while the documented consumable or setting needs attention - Model boundary — apply this interpretation only to Samsung washing-machine models covered by the linked US washing-machine error-code article ## Verified diagnosis - Photograph the complete SDC / 5DC display before changing controls or removing power - Confirm that the full model number is covered by this scope: Samsung washing-machine models covered by the linked US washing-machine error-code article - Confirm that the observed condition matches the published meaning: the detergent drawer is not fully closed - Published check — Close the detergent drawer completely and run one controlled test - Published check — request service if the code returns with the drawer correctly seated - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check - if SDC / 5DC remains, stop and move to exact-model diagnosis - Published check — If SDC / 5DC returns after the listed action, do not repeat the same correction indefinitely - Published check — continue with exact-model diagnosis - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check; if SDC / 5DC remains, stop and move to exact-model diagnosis ## Evidence-backed actions - Close the detergent drawer completely and run one controlled test - request service if the code returns with the drawer correctly seated - If SDC / 5DC returns after the listed action, do not repeat the same correction indefinitely - continue with exact-model diagnosis - If SDC / 5DC returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Follow the exact model manual. Close the detergent drawer completely and run one controlled test; request service if the code returns with the drawer correctly seated. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Samsung US washing-machine error-code support - Source URL: https://www.samsung.com/us/support/troubleshoot/TSG10000997/ - Source checked: 2026-08-07 - Procedure verified: 2026-08-07 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.