# Siemens dishwasher E01 / E02 / E03 / E04 / E05 code Canonical page: https://getfixfault.com/guides/siemens-dishwasher-e01-e02-e03-e04-e05-code AI-readable URL: https://getfixfault.com/guides/siemens-dishwasher-e01-e02-e03-e04-e05-code.txt Last reviewed: 2026-08-03 ## Direct answer Siemens Dishwasher E01 / E02 / E03 / E04 / E05: Electronic fault or interrupted programme. This interpretation applies to Siemens dishwasher models listed by the linked official code table in Ireland / English. ## Exact scope - Brand: Siemens - Appliance: Dishwasher - Error code or indicator: E01 / E02 / E03 / E04 / E05 - Model scope: Siemens dishwasher models listed by the linked official code table - Region: Ireland / English ## What users may observe - E01 / E02 / E03 / E04 / E05 is shown on the Siemens dishwasher display, indicator, or connected app - The published condition is: Electronic fault or interrupted programme - The appliance has reached the manufacturer-defined stop or service condition associated with E01 / E02 / E03 / E04 / E05 - The important observation is when E01 / E02 / E03 / E04 / E05 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — Electronic fault or interrupted programme - E01 / E02 / E03 / E04 / E05 defines a service boundary; the failed internal part still requires exact-model diagnosis - Model boundary — apply this interpretation only to Siemens dishwasher models listed by the linked official code table ## Verified diagnosis - Photograph the complete E01 / E02 / E03 / E04 / E05 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Siemens dishwasher models listed by the linked official code table - Confirm that the observed condition matches the published meaning: Electronic fault or interrupted programme - Switch the dishwasher off at its power button - Wait a few minutes, then switch it back on once - If the code remains, close the water tap and disconnect power - Arrange Siemens service - Published check — Siemens identifies E01–E05 as an electronics-related fault or an interrupted program - Published check — Its published user action is one switch-off and restart - Published check — If the code remains, close the water tap, disconnect power, and arrange Siemens service ## Evidence-backed actions - Siemens identifies E01–E05 as an electronics-related fault or an interrupted program - Its published user action is one switch-off and restart - If the code remains, close the water tap, disconnect power, and arrange Siemens service - no electronics repair is safe from the code alone - Give service the E01 / E02 / E03 / E04 / E05 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Do not open fixed panels or test live electrical parts. Record the full model number and arrange qualified service if the code returns after the permitted external checks. ## Primary evidence - Source: Siemens Ireland dishwasher error codes - Source URL: https://www.siemens-home.bsh-group.com/ie/customer-service/support/troubleshooting/problems/dishcare/dishcare-error-codes - Source checked: 2026-08-03 - Procedure verified: 2026-08-03 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.