# Siemens dishwasher E08 code Canonical page: https://getfixfault.com/guides/siemens-dishwasher-e08-code AI-readable URL: https://getfixfault.com/guides/siemens-dishwasher-e08-code.txt Last reviewed: 2026-08-03 ## Direct answer Siemens Dishwasher E08: Water level in the rinse bath is too low. This interpretation applies to Siemens dishwasher models listed by the linked official code table in Ireland / English. ## Exact scope - Brand: Siemens - Appliance: Dishwasher - Error code or indicator: E08 - Model scope: Siemens dishwasher models listed by the linked official code table - Region: Ireland / English ## What users may observe - E08 is shown on the Siemens dishwasher display, indicator, or connected app - The published condition is: Water level in the rinse bath is too low - The affected function behaves as described by the manufacturer while E08 is present - The important observation is when E08 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — Water level in the rinse bath is too low - E08 identifies the documented condition, not a confirmed replacement part - Model boundary — apply this interpretation only to Siemens dishwasher models listed by the linked official code table ## Verified diagnosis - Photograph the complete E08 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Siemens dishwasher models listed by the linked official code table - Confirm that the observed condition matches the published meaning: Water level in the rinse bath is too low - Open the dishwasher only when the cycle has stopped safely - Check that bowls or pots have not tipped over and collected water - Check that dishes are not covering the internal water-intake opening - Rearrange the load and run one cycle - Contact Siemens service if E08 returns - Published check — Siemens identifies E08 as a low water level in the rinse bath - Published check — Check the loading first: upright bowls or pots can retain water, and dishes can cover the internal water intake ## Evidence-backed actions - Siemens identifies E08 as a low water level in the rinse bath - Check the loading first: upright bowls or pots can retain water, and dishes can cover the internal water intake - Rearrange the load, test once, and arrange service if the code returns - Give service the E08 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Switch the dishwasher off before cleaning user-accessible parts. Hidden glass may be present near the filter and pump cover. ## Primary evidence - Source: Siemens Ireland dishwasher error codes - Source URL: https://www.siemens-home.bsh-group.com/ie/customer-service/support/troubleshooting/problems/dishcare/dishcare-error-codes - Source checked: 2026-08-03 - Procedure verified: 2026-08-03 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.