# Siemens dishwasher E16 / E3400 code Canonical page: https://getfixfault.com/guides/siemens-dishwasher-e16-e3400-code AI-readable URL: https://getfixfault.com/guides/siemens-dishwasher-e16-e3400-code.txt Last reviewed: 2026-08-03 ## Direct answer Siemens Dishwasher E16 / E3400: Water-fill system fault. This interpretation applies to Siemens dishwasher models listed by the linked official code table in Ireland / English. ## Exact scope - Brand: Siemens - Appliance: Dishwasher - Error code or indicator: E16 / E3400 - Model scope: Siemens dishwasher models listed by the linked official code table - Region: Ireland / English ## What users may observe - E16 / E3400 is shown on the Siemens dishwasher display, indicator, or connected app - The published condition is: Water-fill system fault - The affected fill stage does not receive or confirm the expected water supply while E16 / E3400 is active - The important observation is when E16 / E3400 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — Water-fill system fault - E16 / E3400 does not distinguish household supply, hose, accessible screen, inlet hardware, wiring, or control until the listed checks are completed - Model boundary — apply this interpretation only to Siemens dishwasher models listed by the linked official code table ## Verified diagnosis - Photograph the complete E16 / E3400 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Siemens dishwasher models listed by the linked official code table - Confirm that the observed condition matches the published meaning: Water-fill system fault - Close the water tap - Check that the visible inlet hose is not kinked - Confirm water can flow at the household tap - Record the exact code and model number - Contact Siemens service if the fault persists - Published check — Siemens identifies E16/E3400 as a filling-system or water-inlet fault - Published check — Close the water tap, check the visible inlet hose and household water flow, then contact Siemens service if the problem recurs ## Evidence-backed actions - Siemens identifies E16/E3400 as a filling-system or water-inlet fault - Close the water tap, check the visible inlet hose and household water flow, then contact Siemens service if the problem recurs - A technician is required for a persistent appliance fault - Give service the E16 / E3400 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Do not open fixed panels or test live electrical parts. Record the full model number and arrange qualified service if the code returns after the permitted external checks. ## Primary evidence - Source: Siemens Ireland dishwasher error codes - Source URL: https://www.siemens-home.bsh-group.com/ie/customer-service/support/troubleshooting/problems/dishcare/dishcare-error-codes - Source checked: 2026-08-03 - Procedure verified: 2026-08-03 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.