# Vaillant Heat pump F.22 error Canonical page: https://getfixfault.com/guides/vaillant-heat-pump-f-22-official-code AI-readable URL: https://getfixfault.com/guides/vaillant-heat-pump-f-22-official-code.txt Last reviewed: 2026-08-09 ## Direct answer Vaillant Heat pump F.22: low water pressure in the heating system. This interpretation applies to Vaillant heat-pump models covered by the linked official UK heat-pump fault-code page in United Kingdom / English. ## Exact scope - Brand: Vaillant - Appliance: Heat pump - Error code or indicator: F.22 - Model scope: Vaillant heat-pump models covered by the linked official UK heat-pump fault-code page - Region: United Kingdom / English ## What users may observe - F.22 is shown on the Vaillant heat pump display, indicator, or connected app - The published condition is: low water pressure in the heating system - The affected fill stage does not receive or confirm the expected water supply while F.22 is active - The important observation is when F.22 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — low water pressure in the heating system - F.22 does not distinguish household supply, hose, accessible screen, inlet hardware, wiring, or control until the listed checks are completed - Model boundary — apply this interpretation only to Vaillant heat-pump models covered by the linked official UK heat-pump fault-code page ## Verified diagnosis - Photograph the complete F.22 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Vaillant heat-pump models covered by the linked official UK heat-pump fault-code page - Confirm that the observed condition matches the published meaning: low water pressure in the heating system - Published check — If the system pressure is below 1 bar and the owner is competent, use the filling loop to raise it slowly to 1–1.5 bar - Published check — if pressure is above 1 bar or the fault returns, contact a Vaillant engineer - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check - if F.22 remains, stop and move to exact-model diagnosis - Published check — If F.22 returns after the listed action, do not repeat the same correction indefinitely - Published check — continue with exact-model diagnosis - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check; if F.22 remains, stop and move to exact-model diagnosis ## Evidence-backed actions - If the system pressure is below 1 bar and the owner is competent, use the filling loop to raise it slowly to 1–1.5 bar - if pressure is above 1 bar or the fault returns, contact a Vaillant engineer - If F.22 returns after the listed action, do not repeat the same correction indefinitely - continue with exact-model diagnosis - If F.22 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Follow the exact model manual. If the system pressure is below 1 bar and the owner is competent, use the filling loop to raise it slowly to 1–1.5 bar; if pressure is above 1 bar or the fault returns, contact a Vaillant engineer. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Vaillant UK official heat-pump fault-code support - Source URL: https://www.vaillant.co.uk/service/heat-pump-fault-codes/ - Source checked: 2026-08-09 - Procedure verified: 2026-08-09 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.