# Vaillant Heat pump F.729 error Canonical page: https://getfixfault.com/guides/vaillant-heat-pump-f-729-official-code AI-readable URL: https://getfixfault.com/guides/vaillant-heat-pump-f-729-official-code.txt Last reviewed: 2026-08-09 ## Direct answer Vaillant Heat pump F.729: compressor outlet temperature too low. This interpretation applies to Vaillant heat-pump models covered by the linked official UK heat-pump fault-code page in United Kingdom / English. ## Exact scope - Brand: Vaillant - Appliance: Heat pump - Error code or indicator: F.729 - Model scope: Vaillant heat-pump models covered by the linked official UK heat-pump fault-code page - Region: United Kingdom / English ## What users may observe - F.729 is shown on the Vaillant heat pump display, indicator, or connected app - The published condition is: compressor outlet temperature too low - The measured temperature condition does not match the operating range represented by F.729 - The important observation is when F.729 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — compressor outlet temperature too low - F.729 identifies the temperature condition but does not alone prove a sensor, airflow, heater, refrigerant, wiring, or control fault - Model boundary — apply this interpretation only to Vaillant heat-pump models covered by the linked official UK heat-pump fault-code page ## Verified diagnosis - Photograph the complete F.729 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Vaillant heat-pump models covered by the linked official UK heat-pump fault-code page - Confirm that the observed condition matches the published meaning: compressor outlet temperature too low - Published check — Arrange Vaillant engineer service for the sensors, pressure circuit, expansion valve, four-way valve, and refrigerant diagnosis - Stop at the published service boundary after these actions - do not add a restart or test cycle that Vaillant does not specify for F.729 - Published check — Give service the F.729 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Vaillant does not specify for F.729 ## Evidence-backed actions - Arrange Vaillant engineer service for the sensors, pressure circuit, expansion valve, four-way valve, and refrigerant diagnosis - Give service the F.729 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Isolate the appliance when safe. Arrange Vaillant engineer service for the sensors, pressure circuit, expansion valve, four-way valve, and refrigerant diagnosis. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Vaillant UK official heat-pump fault-code support - Source URL: https://www.vaillant.co.uk/service/heat-pump-fault-codes/ - Source checked: 2026-08-09 - Procedure verified: 2026-08-09 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.