# Vaillant Heat pump F.733 error Canonical page: https://getfixfault.com/guides/vaillant-heat-pump-f-733-official-code AI-readable URL: https://getfixfault.com/guides/vaillant-heat-pump-f-733-official-code.txt Last reviewed: 2026-08-09 ## Direct answer Vaillant Heat pump F.733: evaporation temperature too low. This interpretation applies to Vaillant heat-pump models covered by the linked official UK heat-pump fault-code page in United Kingdom / English. ## Exact scope - Brand: Vaillant - Appliance: Heat pump - Error code or indicator: F.733 - Model scope: Vaillant heat-pump models covered by the linked official UK heat-pump fault-code page - Region: United Kingdom / English ## What users may observe - F.733 is shown on the Vaillant heat pump display, indicator, or connected app - The published condition is: evaporation temperature too low - The measured temperature condition does not match the operating range represented by F.733 - The important observation is when F.733 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — evaporation temperature too low - F.733 identifies the temperature condition but does not alone prove a sensor, airflow, heater, refrigerant, wiring, or control fault - Model boundary — apply this interpretation only to Vaillant heat-pump models covered by the linked official UK heat-pump fault-code page ## Verified diagnosis - Photograph the complete F.733 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Vaillant heat-pump models covered by the linked official UK heat-pump fault-code page - Confirm that the observed condition matches the published meaning: evaporation temperature too low - Published check — Arrange an installer inspection of the external air heat exchanger and qualified heat-pump diagnosis - Published check — do not access the fan, refrigerant circuit, or expansion valve - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check - if F.733 remains, stop and move to exact-model diagnosis - Published check — If F.733 returns after the listed action, do not repeat the same correction indefinitely - Published check — continue with exact-model diagnosis - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check; if F.733 remains, stop and move to exact-model diagnosis ## Evidence-backed actions - Arrange an installer inspection of the external air heat exchanger and qualified heat-pump diagnosis - do not access the fan, refrigerant circuit, or expansion valve - If F.733 returns after the listed action, do not repeat the same correction indefinitely - continue with exact-model diagnosis - If F.733 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Isolate the appliance when safe. Arrange an installer inspection of the external air heat exchanger and qualified heat-pump diagnosis; do not access the fan, refrigerant circuit, or expansion valve. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Vaillant UK official heat-pump fault-code support - Source URL: https://www.vaillant.co.uk/service/heat-pump-fault-codes/ - Source checked: 2026-08-09 - Procedure verified: 2026-08-09 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.