# Vaillant Heat pump F.817 error Canonical page: https://getfixfault.com/guides/vaillant-heat-pump-f-817-official-code AI-readable URL: https://getfixfault.com/guides/vaillant-heat-pump-f-817-official-code.txt Last reviewed: 2026-08-09 ## Direct answer Vaillant Heat pump F.817: inverter-board mains-voltage fault. This interpretation applies to Vaillant heat-pump models covered by the linked official UK heat-pump fault-code page in United Kingdom / English. ## Exact scope - Brand: Vaillant - Appliance: Heat pump - Error code or indicator: F.817 - Model scope: Vaillant heat-pump models covered by the linked official UK heat-pump fault-code page - Region: United Kingdom / English ## What users may observe - F.817 is shown on the Vaillant heat pump display, indicator, or connected app - The published condition is: inverter-board mains-voltage fault - The appliance reports the documented supply, interruption, wiring, or power-restoration condition - The important observation is when F.817 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — inverter-board mains-voltage fault - F.817 does not alone locate the fault in the outlet, breaker, cord, installation wiring, appliance wiring, or control - Model boundary — apply this interpretation only to Vaillant heat-pump models covered by the linked official UK heat-pump fault-code page ## Verified diagnosis - Photograph the complete F.817 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Vaillant heat-pump models covered by the linked official UK heat-pump fault-code page - Confirm that the observed condition matches the published meaning: inverter-board mains-voltage fault - Published check — Contact a qualified heating installer or Vaillant engineer to check supply voltage, phases, polarity, earthing, and the inverter - Published check — do not test live power - Stop at the published service boundary after these actions - do not add a restart or test cycle that Vaillant does not specify for F.817 - Published check — Give service the F.817 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Vaillant does not specify for F.817 ## Evidence-backed actions - Contact a qualified heating installer or Vaillant engineer to check supply voltage, phases, polarity, earthing, and the inverter - do not test live power - Give service the F.817 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Isolate the appliance when safe. Contact a qualified heating installer or Vaillant engineer to check supply voltage, phases, polarity, earthing, and the inverter; do not test live power. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Vaillant UK official heat-pump fault-code support - Source URL: https://www.vaillant.co.uk/service/heat-pump-fault-codes/ - Source checked: 2026-08-09 - Procedure verified: 2026-08-09 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.