LG · Washing machine

LG washer AE code

ErrorAE

AE is listed by LG support as possible internal water leak detected. The exact checks and component layout can vary by model and region.

✓

Source-linked guidance reviewed against LG US front-load washer error codes.

Open official source ↗

Stop and make safe

Possible internal water leak detected

Stop the cycle and close the water supply. Disconnect power only if it is safe, and arrange service for continued filling or an internal leak.

Typical symptoms

01The washer stops and activates its internal leak protection

02Water may be visible near a hose connection or beneath the appliance

03The drain pump may run to reduce the risk of flooding

Likely causes

Start with the least invasive explanation and stop if the check requires internal electrical or sealed-system access.

01Possible internal water leak detected

Safe next steps

1
Close both water taps and check the visible inlet hoses for cuts or loose threaded connections
Follow the exact model manual where access or reset steps differ by product series.
2
If the floor and plug area are dry, unplug the washer for 60 seconds
Follow the exact model manual where access or reset steps differ by product series.
3
Do not remove panels or keep running cycles to dry the machine
Follow the exact model manual where access or reset steps differ by product series.
4
If AE returns or water is visible, leave the taps closed and request leak-system service
Follow the exact model manual where access or reset steps differ by product series.

When to stop

Stop if you see damaged wiring, smell burning, find an active leak, suspect gas or refrigerant, or need to remove a sealed electrical cover. Use a qualified appliance technician.