AEG Dishwasher iCo error
iCo is identified by AEG support as circulation or heating electronics condition. Follow the official, model-scoped checks and service boundary below.
What iCo means
AEG Dishwasher iCo: circulation or heating electronics condition. This interpretation applies to AEG dishwashers covered by the linked UK support article in United Kingdom / English.
- Model scope
- AEG dishwashers covered by the linked UK support article
- Region
- United Kingdom / English
- Verified
circulation or heating electronics condition
Isolate the appliance when safe. record the code, isolate power if safe, and arrange an AEG-authorised service visit Do not open fixed panels or test live circuits.
Typical symptoms
Fault area and what the code does not prove
Separate the manufacturer-defined condition from components that still need exact-model diagnosis.
Safe next steps
- 1Confirm the exact AEG Dishwasher iCo model and displayed code before taking action.
- 2Keep the appliance in a safe state and use only the external checks named in the official source.
- 3If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.
Step-by-step diagnosis
- 1Photograph the complete iCo display before changing controls or removing power
- 2Confirm that the full model number is covered by this scope: AEG dishwashers covered by the linked UK support article
- 3Confirm that the observed condition matches the published meaning: circulation or heating electronics condition
- 4Published check — record the code, isolate power if safe, and arrange an AEG-authorised service visit
- 5Stop at the published service boundary after these actions
- 6do not add a restart or test cycle that AEG does not specify for iCo
- 7Published check — Give service the iCo photo, full model and serial number, when it appeared, and the result of every published external check
- 8Stop at the published service boundary after these actions; do not add a restart or test cycle that AEG does not specify for iCo
Service-safe actions
- 1record the code, isolate power if safe, and arrange an AEG-authorised service visit
- 2Give service the iCo photo, full model and serial number, when it appeared, and the result of every published external check
Repair planning
iCo cost planning: Accessible airflow cleaning is usually €0. A qualified fan or circulation diagnosis is generally planned within €90–€220 before parts.
iCo time plan: 10–25 minutes for the documented iCo airflow or obstruction check; professional fan/circulation diagnosis commonly takes 30–90 minutes.
Photo of iCo, Flashlight for user-accessible vents or obstructions, Soft brush or vacuum only where the exact manual permits, No live fan-circuit test equipment
iCo parts decision: iCo identifies circulation or heating electronics condition. Clear only a documented accessible obstruction; a fan, motor, duct, sensor, wiring, or control part requires exact-model diagnosis.
What not to do
- Do not reach into a moving fan, force an iced or jammed blade, push debris into a duct, or operate without required covers or filters
- Do not run an extra test cycle after the source tells you to stop or arrange service for iCo
Preventive maintenance
- 1Follow the exact AEG maintenance schedule for the dishwasher and keep the model, serial number, and service history available
- 2If iCo begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis
Frequently asked questions
What exactly does iCo identify?
AEG identifies it as circulation or heating electronics condition.
Which action is actually supported for iCo?
record the code, isolate power if safe, and arrange an AEG-authorised service visit; Give service the iCo photo, full model and serial number, when it appeared, and the result of every published external check.
Can I run another test after iCo?
Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.
Does iCo prove which part failed?
No. It identifies “circulation or heating electronics condition”; parts are selected only after the exact model and failed function are confirmed.
What information should accompany a service request?
The iCo photo, full model and serial number, the operating stage when it appeared, and the result of each published check.
Did this guide fix your appliance?
Your anonymous response helps us show which repairs work in the real world. One current response is kept per guide.