Bosch · Dishwasher

Bosch dishwasher E06 code

ErrorE06

E06 is listed by Bosch support as door-sensor circuit fault. The exact checks and component layout can vary by model and region.

✓

Source-linked guidance reviewed against Bosch US dishwasher error codes.

Open official source ↗

✓

What the code means

Door-sensor circuit fault

Do not open fixed panels or test live electrical parts. Record the full model number and arrange qualified service if the code returns after the permitted external checks.

Typical symptoms

01The dishwasher may act as if the door is open even when it is latched

02The selected program may not start or may pause unexpectedly

03E06 returns after the door is reopened and closed

Likely causes

Start with the least invasive explanation and stop if the check requires internal electrical or sealed-system access.

01Door-sensor circuit fault

Safe next steps

1
Press ON/OFF to stop the dishwasher; do not remove fixed panels
Follow the exact model manual where access or reset steps differ by product series.
2
At the household breaker, switch dishwasher power off for 30 seconds
Follow the exact model manual where access or reset steps differ by product series.
3
Restore power and start one short rinse cycle
Follow the exact model manual where access or reset steps differ by product series.
4
If E06 returns, stop the cycle: the door-sensor circuit needs Bosch-authorized diagnosis and is not a safe DIY repair
Follow the exact model manual where access or reset steps differ by product series.

When to stop

Stop if you see damaged wiring, smell burning, find an active leak, suspect gas or refrigerant, or need to remove a sealed electrical cover. Use a qualified appliance technician.