Bosch · Dishwasher

Bosch dishwasher E6101 code

ErrorE6101

E6101 is listed by Bosch support as drain-pump fault or blockage. The exact checks and component layout can vary by model and region.

✓

Source-linked guidance reviewed against Bosch US dishwasher error codes.

Open official source ↗

✓

What the code means

Drain-pump fault or blockage

Do not open fixed panels or test live electrical parts. Record the full model number and arrange qualified service if the code returns after the permitted external checks.

Typical symptoms

01The dishwasher cannot finish draining

02Standing water remains and the pump may hum or stay silent

03E6101 points to a blocked, clogged, or faulty drain pump

Likely causes

Start with the least invasive explanation and stop if the check requires internal electrical or sealed-system access.

01Drain-pump fault or blockage

Safe next steps

1
Switch the dishwasher off and check only the user-accessible filter for obvious debris
Follow the exact model manual where access or reset steps differ by product series.
2
Do not reach into or electrically test the drain pump
Follow the exact model manual where access or reset steps differ by product series.
3
Arrange Bosch service if E6101 remains; Bosch identifies this as a blocked, clogged, or faulty drain-pump condition
Follow the exact model manual where access or reset steps differ by product series.

When to stop

Stop if you see damaged wiring, smell burning, find an active leak, suspect gas or refrigerant, or need to remove a sealed electrical cover. Use a qualified appliance technician.