Bosch · Dishwasher

Bosch dishwasher E07 code

ErrorE07

E07 is listed by Bosch support as zeolite drying fan motor fault. The exact checks and component layout can vary by model and region.

✓

Source-linked guidance reviewed against Bosch US dishwasher error codes.

Open official source ↗

✓

What the code means

Zeolite drying fan motor fault

Do not open fixed panels or test live electrical parts. Record the full model number and arrange qualified service if the code returns after the permitted external checks.

Typical symptoms

01Crystal Dry performance is reduced or absent

02Dishes remain wetter than normal at the end of the cycle

03E07 indicates that the Zeolite drying fan is not operating correctly

Likely causes

Start with the least invasive explanation and stop if the check requires internal electrical or sealed-system access.

01Zeolite drying fan motor fault

Safe next steps

1
Press ON/OFF to stop the dishwasher; do not remove fixed panels
Follow the exact model manual where access or reset steps differ by product series.
2
At the household breaker, switch dishwasher power off for 30 seconds
Follow the exact model manual where access or reset steps differ by product series.
3
Restore power and start one short rinse cycle
Follow the exact model manual where access or reset steps differ by product series.
4
If E07 returns, stop the cycle: the Crystal Dry fan motor needs Bosch-authorized diagnosis and is not a safe DIY repair
Follow the exact model manual where access or reset steps differ by product series.

When to stop

Stop if you see damaged wiring, smell burning, find an active leak, suspect gas or refrigerant, or need to remove a sealed electrical cover. Use a qualified appliance technician.