Bosch Dishwasher E07 error
E07 is identified by Bosch support as a dishwasher drying-system condition. Follow the official, model-scoped checks and service boundary below.
What E07 means
Bosch Dishwasher E07: a dishwasher drying-system condition. This interpretation applies to Bosch dishwasher models covered by the linked Bosch official error-code support page in United States / English.
- Model scope
- Bosch dishwasher models covered by the linked Bosch official error-code support page
- Region
- United States / English
- Verified
a dishwasher drying-system condition
Isolate the appliance when safe. Keep vents clear, stop repeated testing, and arrange Bosch service if E07 returns; do not open the drying circuit. Do not open fixed panels or test live circuits.
Typical symptoms
Fault area and what the code does not prove
Separate the manufacturer-defined condition from components that still need exact-model diagnosis.
Safe next steps
- 1Confirm the exact Bosch Dishwasher E07 model and displayed code before taking action.
- 2Keep the appliance in a safe state and use only the external checks named in the official source.
- 3If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.
Step-by-step diagnosis
- 1Photograph the complete E07 display before changing controls or removing power
- 2Confirm that the full model number is covered by this scope: Bosch dishwasher models covered by the linked Bosch official error-code support page
- 3Confirm that the observed condition matches the published meaning: a dishwasher drying-system condition
- 4Published check — Keep vents clear, stop repeated testing, and arrange Bosch service if E07 returns
- 5Published check — do not open the drying circuit
- 6Stop at the published service boundary after these actions
- 7do not add a restart or test cycle that Bosch does not specify for E07
- 8Published check — Give service the E07 photo, full model and serial number, when it appeared, and the result of every published external check
- 9Stop at the published service boundary after these actions; do not add a restart or test cycle that Bosch does not specify for E07
Service-safe actions
- 1Keep vents clear, stop repeated testing, and arrange Bosch service if E07 returns
- 2do not open the drying circuit
- 3Give service the E07 photo, full model and serial number, when it appeared, and the result of every published external check
Repair planning
E07 cost planning: The source-listed safety check is usually €0. €90–€220 is a typical Europe planning range for diagnosis before parts; it is not Bosch pricing. Ask for separate diagnosis, parts, labor, and call-out lines on the quote.
E07 time plan: 5–10 minutes to document and isolate safely; 30–90 minutes is a typical diagnostic visit before any model-specific repair.
Phone camera for the complete E07 display, Full model and serial number, Power or water isolation access as described by the official procedure
E07 parts decision: No component should be ordered from E07 alone. The documented fault area is “a dishwasher drying-system condition”; the technician must identify the failed model-specific part and revision.
What not to do
- Do not open fixed panels, test live circuits, bypass protection, or keep operating the appliance after an urgent stop instruction
- Do not run an extra test cycle after the source tells you to stop or arrange service for E07
Preventive maintenance
- 1Follow the exact Bosch maintenance schedule for the dishwasher and keep the model, serial number, and service history available
- 2If E07 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis
Frequently asked questions
What exactly does E07 identify?
Bosch identifies it as a dishwasher drying-system condition.
Which action is actually supported for E07?
Keep vents clear, stop repeated testing, and arrange Bosch service if E07 returns; do not open the drying circuit; Give service the E07 photo, full model and serial number, when it appeared, and the result of every published external check.
Can I run another test after E07?
Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.
Does E07 prove which part failed?
No. It identifies “a dishwasher drying-system condition”; parts are selected only after the exact model and failed function are confirmed.
What information should accompany a service request?
The E07 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.
Did this guide fix your appliance?
Your anonymous response helps us show which repairs work in the real world. One current response is kept per guide.