Bosch · Dishwasher

Bosch dishwasher E14 code

ErrorE14

E14 is listed by Bosch support as flow-meter or water-filling fault. The exact checks and component layout can vary by model and region.

✓

Source-linked guidance reviewed against Bosch US dishwasher error codes.

Open official source ↗

✓

What the code means

Flow-meter or water-filling fault

Do not open fixed panels or test live electrical parts. Record the full model number and arrange qualified service if the code returns after the permitted external checks.

Typical symptoms

01The dishwasher fills too little, too much, or stops while filling

02Little or no water may be heard entering the tub

03E14 points to flow measurement or filling-system trouble

Likely causes

Start with the least invasive explanation and stop if the check requires internal electrical or sealed-system access.

01Flow-meter or water-filling fault

Safe next steps

1
Confirm the water-supply valve is fully open and the visible inlet hose is not kinked
Follow the exact model manual where access or reset steps differ by product series.
2
If those external checks are clear, stop the dishwasher
Follow the exact model manual where access or reset steps differ by product series.
3
Arrange Bosch service for the flow meter or filling system; do not remove panels or bypass the inlet valve
Follow the exact model manual where access or reset steps differ by product series.

When to stop

Stop if you see damaged wiring, smell burning, find an active leak, suspect gas or refrigerant, or need to remove a sealed electrical cover. Use a qualified appliance technician.