Bosch · Dishwasher

Bosch dishwasher E15 error

ErrorE15

E15 usually means the dishwasher's water-protection system has detected water in the base tray.

Source-linked guidance reviewed against Bosch owner support.

Open official source ↗
!
Stop and make safe

Leakage protection activated

Disconnect power and close the water supply. Do not tilt a built-in dishwasher while it is connected.

Typical symptoms

01The E15 code remains on the display
02The drain pump may keep running
03The dishwasher may refuse to start a cycle

Likely causes

Start with the least invasive explanation and stop if the check requires internal electrical or sealed-system access.

01Water in the base tray
02A loose internal hose or seal
03Excess foam caused by incorrect detergent

Safe next steps

  1. 1
    Switch off the dishwasher and close the water supply

    Follow the exact model manual where access or reset steps differ by product series.

  2. 2
    Check for visible water around and beneath the appliance

    Follow the exact model manual where access or reset steps differ by product series.

  3. 3
    Arrange a qualified inspection if the code returns

    Follow the exact model manual where access or reset steps differ by product series.

When to stop

Stop if you see damaged wiring, smell burning, find an active leak, suspect gas or refrigerant, or need to remove a sealed electrical cover. Use a qualified appliance technician.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.