Bosch · Dishwasher

Bosch dishwasher E16 / E17 code

ErrorE16 / E17

E16 / E17 is listed by Bosch support as water cannot enter the dishwasher normally. The exact checks and component layout can vary by model and region.

✓

Source-linked guidance reviewed against Bosch US dishwasher error codes.

Open official source ↗

✓

What the code means

Water cannot enter the dishwasher normally

Switch the dishwasher off before cleaning user-accessible parts. Hidden glass may be present near the filter and pump cover.

Typical symptoms

01The program starts but little or no water enters the tub

02The dishwasher may stop near the beginning of the cycle

03The inlet hose may be visibly kinked, damaged, or restricted

Likely causes

Start with the least invasive explanation and stop if the check requires internal electrical or sealed-system access.

01Water cannot enter the dishwasher normally

Safe next steps

1
Open the water-supply valve fully
Follow the exact model manual where access or reset steps differ by product series.
2
Inspect the complete visible inlet hose and straighten any kink; replace it if the outer jacket is damaged
Follow the exact model manual where access or reset steps differ by product series.
3
Confirm the hose connection is not leaking, then restart one short cycle
Follow the exact model manual where access or reset steps differ by product series.
4
If the code returns, close the water valve and arrange Bosch service for the filling system
Follow the exact model manual where access or reset steps differ by product series.

When to stop

Stop if you see damaged wiring, smell burning, find an active leak, suspect gas or refrigerant, or need to remove a sealed electrical cover. Use a qualified appliance technician.