Bosch dishwasher E3100 code
E3100 is listed by Bosch support as leakage protection detected water in the base. The exact checks and component layout can vary by model and region.
Leakage protection detected water in the base
Stop the cycle, close the water supply, and isolate power only if the area is dry and access is safe. Do not tilt or open fixed panels.
Typical symptoms
Likely causes
Start with the least invasive explanation and stop if the check requires internal electrical or sealed-system access.
Safe next steps
- 1Cancel the cycle and close the dishwasher water-supply valve
Follow the exact model manual where access or reset steps differ by product series.
- 2Switch off power only if the floor, plug area, and your hands are completely dry
Follow the exact model manual where access or reset steps differ by product series.
- 3Do not tilt the dishwasher or remove the kick plate; this can move water onto electrical parts
Follow the exact model manual where access or reset steps differ by product series.
- 4Arrange Bosch service for E3100; the base leak-protection switch has detected water and the leak source must be found
Follow the exact model manual where access or reset steps differ by product series.
When to stop
Stop if you see damaged wiring, smell burning, find an active leak, suspect gas or refrigerant, or need to remove a sealed electrical cover. Use a qualified appliance technician.