Bosch Washing machine E27 / F27 error
E27 / F27 is identified by Bosch support as a washing-machine pressure-switch condition. Follow the official, model-scoped checks and service boundary below.
What E27 / F27 means
Bosch Washing machine E27 / F27: a washing-machine pressure-switch condition. This interpretation applies to Bosch washing machine models covered by the linked Bosch official error-code support page in United States / English.
- Model scope
- Bosch washing machine models covered by the linked Bosch official error-code support page
- Region
- United States / English
- Verified
a washing-machine pressure-switch condition
Isolate the appliance when safe. Record the exact code and model and arrange Bosch service; do not bypass the pressure system. Do not open fixed panels or test live circuits.
Typical symptoms
Fault area and what the code does not prove
Separate the manufacturer-defined condition from components that still need exact-model diagnosis.
Safe next steps
- 1Confirm the exact Bosch Washing machine E27 / F27 model and displayed code before taking action.
- 2Keep the appliance in a safe state and use only the external checks named in the official source.
- 3If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.
Step-by-step diagnosis
- 1Photograph the complete E27 / F27 display before changing controls or removing power
- 2Confirm that the full model number is covered by this scope: Bosch washing machine models covered by the linked Bosch official error-code support page
- 3Confirm that the observed condition matches the published meaning: a washing-machine pressure-switch condition
- 4Published check — Record the exact code and model and arrange Bosch service
- 5Published check — do not bypass the pressure system
- 6Stop at the published service boundary after these actions
- 7do not add a restart or test cycle that Bosch does not specify for E27 / F27
- 8Published check — Give service the E27 / F27 photo, full model and serial number, when it appeared, and the result of every published external check
- 9Stop at the published service boundary after these actions; do not add a restart or test cycle that Bosch does not specify for E27 / F27
Service-safe actions
- 1Record the exact code and model and arrange Bosch service
- 2do not bypass the pressure system
- 3Give service the E27 / F27 photo, full model and serial number, when it appeared, and the result of every published external check
Repair planning
E27 / F27 cost planning: The source-listed safety check is usually €0. €90–€220 is a typical Europe planning range for diagnosis before parts; it is not Bosch pricing. Ask for separate diagnosis, parts, labor, and call-out lines on the quote.
E27 / F27 time plan: 5–10 minutes to document and isolate safely; 30–90 minutes is a typical diagnostic visit before any model-specific repair.
Phone camera for the complete E27 / F27 display, Full model and serial number, Power or water isolation access as described by the official procedure
E27 / F27 parts decision: No component should be ordered from E27 / F27 alone. The documented fault area is “a washing-machine pressure-switch condition”; the technician must identify the failed model-specific part and revision.
What not to do
- Do not open fixed panels, test live circuits, bypass protection, or keep operating the appliance after an urgent stop instruction
- Do not run an extra test cycle after the source tells you to stop or arrange service for E27 / F27
Preventive maintenance
- 1Follow the exact Bosch maintenance schedule for the washing machine and keep the model, serial number, and service history available
- 2If E27 / F27 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis
Frequently asked questions
What exactly does E27 / F27 identify?
Bosch identifies it as a washing-machine pressure-switch condition.
Which action is actually supported for E27 / F27?
Record the exact code and model and arrange Bosch service; do not bypass the pressure system; Give service the E27 / F27 photo, full model and serial number, when it appeared, and the result of every published external check.
Can I run another test after E27 / F27?
Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.
Does E27 / F27 prove which part failed?
No. It identifies “a washing-machine pressure-switch condition”; parts are selected only after the exact model and failed function are confirmed.
What information should accompany a service request?
The E27 / F27 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.
Did this guide fix your appliance?
Your anonymous response helps us show which repairs work in the real world. One current response is kept per guide.