Dyson · Air purifier · Fault guide

Dyson Air purifier HP07: AUTO green and fan stopped error

ErrorHP07: AUTO green and fan stopped

HP07: AUTO green and fan stopped is identified by Dyson support as Auto mode has judged the room air to be at its target. Follow the official, model-scoped checks and service boundary below.

Quick answer

What HP07: AUTO green and fan stopped means

Dyson Air purifier HP07: AUTO green and fan stopped: Auto mode has judged the room air to be at its target. This interpretation applies to Dyson purifier heaters covered by the official HP07 air-quality journey in United States / English.

Model scope
Dyson purifier heaters covered by the official HP07 air-quality journey
Region
United States / English
Verified
✓

Primary evidence: Dyson official purifier troubleshooting.

Open official source ↗
✓
What the code means

Auto mode has judged the room air to be at its target

Follow the exact model manual. Allow Auto mode to remain active; the fan may pause normally until the sensed air quality changes. Do not open fixed panels or test live circuits.

Typical symptoms

01HP07: AUTO green and fan stopped is shown on the Dyson air purifier display, indicator, or connected app
02The published condition is: Auto mode has judged the room air to be at its target
03The controls show the documented lock, pause, or setting state until the exact published control action is completed
04If operation no longer matches that description, record the new symptom instead of treating the normal HP07: AUTO green and fan stopped state as the diagnosis

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — Auto mode has judged the room air to be at its target
02HP07: AUTO green and fan stopped does not prove a failed control board while the documented control state is active
03Model boundary — apply this interpretation only to Dyson purifier heaters covered by the official HP07 air-quality journey

Safe next steps

  1. 1
    Confirm the exact Dyson Air purifier HP07: AUTO green and fan stopped model and displayed code before changing settings.
  2. 2
    Complete only the user-accessible checks described in the linked official source.
  3. 3
    Run one controlled test after the check; if the code returns, stop and use the model manual or qualified service.

Step-by-step diagnosis

  1. 1
    Photograph the complete HP07: AUTO green and fan stopped display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: Dyson purifier heaters covered by the official HP07 air-quality journey
  3. 3
    Confirm that the observed condition matches the published meaning: Auto mode has judged the room air to be at its target
  4. 4
    Published check — Allow Auto mode to remain active
  5. 5
    Published check — the fan may pause normally until the sensed air quality changes
  6. 6
    Treat HP07: AUTO green and fan stopped as normal only while the observed operation matches “Auto mode has judged the room air to be at its target”
  7. 7
    a different symptom needs separate diagnosis
  8. 8
    Published check — No component repair is indicated while HP07: AUTO green and fan stopped remains the documented status “Auto mode has judged the room air to be at its target”
  9. 9
    Treat HP07: AUTO green and fan stopped as normal only while the observed operation matches “Auto mode has judged the room air to be at its target”; a different symptom needs separate diagnosis

Evidence-backed actions

  1. 1
    Allow Auto mode to remain active
  2. 2
    the fan may pause normally until the sensed air quality changes
  3. 3
    No component repair is indicated while HP07: AUTO green and fan stopped remains the documented status “Auto mode has judged the room air to be at its target”

Repair planning

€Cost for the first check
HP07: AUTO green and fan stopped cost planning: €0 for the control or setting correction. If the controls remain unresponsive afterward, €60–€140 is a typical Europe planning range for diagnosis before parts; it is not Dyson pricing.
⏱Time for the first check
HP07: AUTO green and fan stopped time plan: 1–5 minutes for the control sequence and one response check.
🔧Tools
No tools required, Use the exact-model control labels shown in the official instructions
▣Parts or consumables
HP07: AUTO green and fan stopped parts decision: None for the published HP07: AUTO green and fan stopped control procedure.

What not to do

  • Do not force a key, pry up the control panel, or repeat the key sequence rapidly if the display does not respond
  • Do not order a part or interrupt normal operation solely because HP07: AUTO green and fan stopped is displayed

Preventive maintenance

  • 1
    Learn the model's normal indicators and control-lock sequence so a status message is not mistaken for a hardware fault
  • 2
    Record a change in behavior rather than treating the normal HP07: AUTO green and fan stopped state itself as a maintenance fault

Frequently asked questions

What exactly does HP07: AUTO green and fan stopped identify?

Dyson identifies it as Auto mode has judged the room air to be at its target.

Which action is actually supported for HP07: AUTO green and fan stopped?

Allow Auto mode to remain active; the fan may pause normally until the sensed air quality changes; No component repair is indicated while HP07: AUTO green and fan stopped remains the documented status “Auto mode has judged the room air to be at its target”.

What result matters after the HP07: AUTO green and fan stopped check?

Whether the documented condition clears after the listed action. If it remains or returns, the exact model needs further diagnosis.

Does HP07: AUTO green and fan stopped prove which part failed?

No. It identifies “Auto mode has judged the room air to be at its target”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The HP07: AUTO green and fan stopped photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.