Dyson · Air purifier · Fault guide

Dyson Air purifier TP01: Remote not responding error

ErrorTP01: Remote not responding

TP01: Remote not responding is identified by Dyson support as the remote does not control the purifier. Follow the official, model-scoped checks and service boundary below.

Quick answer

What TP01: Remote not responding means

Dyson Air purifier TP01: Remote not responding: the remote does not control the purifier. This interpretation applies to Dyson Pure Cool TP01 purifier models covered by the official US troubleshooting journey in United States / English.

Model scope
Dyson Pure Cool TP01 purifier models covered by the official US troubleshooting journey
Region
United States / English
Verified
✓

Primary evidence: Dyson official Pure Cool TP01 troubleshooting.

Open official source ↗
✓
What the code means

the remote does not control the purifier

Follow the exact model manual. Check the remote battery and aim at the receiver, then perform one controlled restart before contacting Dyson. Do not open fixed panels or test live circuits.

Typical symptoms

01TP01: Remote not responding is shown on the Dyson air purifier display, indicator, or connected app
02The published condition is: the remote does not control the purifier
03Charging does not start, continue, or complete in the way described for TP01: Remote not responding
04The important observation is when TP01: Remote not responding appears and whether the exact published action changes that condition

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — the remote does not control the purifier
02TP01: Remote not responding does not alone distinguish battery condition, seating, contacts, dock, charger, temperature, or charging electronics
03Model boundary — apply this interpretation only to Dyson Pure Cool TP01 purifier models covered by the official US troubleshooting journey

Safe next steps

  1. 1
    Confirm the exact Dyson Air purifier TP01: Remote not responding model and displayed code before changing settings.
  2. 2
    Complete only the user-accessible checks described in the linked official source.
  3. 3
    Run one controlled test after the check; if the code returns, stop and use the model manual or qualified service.

Step-by-step diagnosis

  1. 1
    Photograph the complete TP01: Remote not responding display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: Dyson Pure Cool TP01 purifier models covered by the official US troubleshooting journey
  3. 3
    Confirm that the observed condition matches the published meaning: the remote does not control the purifier
  4. 4
    Published check — Check the remote battery and aim at the receiver, then perform one controlled restart before contacting Dyson
  5. 5
    Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check
  6. 6
    if TP01: Remote not responding remains, stop and move to exact-model diagnosis
  7. 7
    Published check — If TP01: Remote not responding returns after the listed action, do not repeat the same correction indefinitely
  8. 8
    Published check — continue with exact-model diagnosis
  9. 9
    Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check; if TP01: Remote not responding remains, stop and move to exact-model diagnosis

Evidence-backed actions

  1. 1
    Check the remote battery and aim at the receiver, then perform one controlled restart before contacting Dyson
  2. 2
    If TP01: Remote not responding returns after the listed action, do not repeat the same correction indefinitely
  3. 3
    continue with exact-model diagnosis
  4. 4
    If TP01: Remote not responding returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis

Repair planning

€Cost for the first check
TP01: Remote not responding cost planning: €0 for cleaning, reseating, or temperature recovery; an exact-model battery commonly costs €35–€130. Charging-board or dock diagnosis is commonly €60–€140 before parts.
⏱Time for the first check
TP01: Remote not responding time plan: 10–20 minutes for dry contact, seating, and connection checks; add the manufacturer-specified cooling or charging wait before retesting.
🔧Tools
Dry microfiber cloth for charging contacts, Exact-model battery removal instructions, No live electrical test equipment
▣Parts or consumables
TP01: Remote not responding parts decision: Use only the exact-model battery or charging accessory approved by Dyson, and only when the published procedure or a confirmed diagnosis requires replacement.

What not to do

  • Do not charge a wet, swollen, damaged, very hot, or very cold battery
  • Do not substitute an unapproved charger or bridge charging contacts
  • Do not turn TP01: Remote not responding into a parts diagnosis
  • the display identifies a condition, not a completed component test
  • Do not turn TP01: Remote not responding into a parts diagnosis; the display identifies a condition, not a completed component test

Preventive maintenance

  • 1
    Keep charging contacts clean and dry, store and charge the battery within the specified temperature range, and use only approved charging accessories
  • 2
    If TP01: Remote not responding begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does TP01: Remote not responding identify?

Dyson identifies it as the remote does not control the purifier.

Which action is actually supported for TP01: Remote not responding?

Check the remote battery and aim at the receiver, then perform one controlled restart before contacting Dyson; If TP01: Remote not responding returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis.

What result matters after the TP01: Remote not responding check?

Whether the documented condition clears after the listed action. If it remains or returns, the exact model needs further diagnosis.

Does TP01: Remote not responding prove which part failed?

No. It identifies “the remote does not control the purifier”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The TP01: Remote not responding photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.