Dyson · Robot vacuum · Fault guide

Dyson Robot vacuum 360 Vis Nav: Brush bar blocked error

Error360 Vis Nav: Brush bar blocked

360 Vis Nav: Brush bar blocked is identified by Dyson support as the robot has detected resistance or obstruction at the brush bar. Follow the official, model-scoped checks and service boundary below.

Quick answer

What 360 Vis Nav: Brush bar blocked means

Dyson Robot vacuum 360 Vis Nav: Brush bar blocked: the robot has detected resistance or obstruction at the brush bar. This interpretation applies to Dyson 360 Vis Nav robot vacuum models covered by the official troubleshooting journey in United States / English.

Model scope
Dyson 360 Vis Nav robot vacuum models covered by the official troubleshooting journey
Region
United States / English
Verified
✓

Primary evidence: Dyson official 360 Vis Nav robot vacuum troubleshooting.

Open official source ↗
✓
What the code means

the robot has detected resistance or obstruction at the brush bar

Follow the exact model manual. Power the robot off, remove only accessible hair and debris from the brush area, refit the brush, and test once. Do not open fixed panels or test live circuits.

Typical symptoms

01360 Vis Nav: Brush bar blocked is shown on the Dyson robot vacuum display, indicator, or connected app
02The published condition is: the robot has detected resistance or obstruction at the brush bar
03The affected function behaves as described by the manufacturer while 360 Vis Nav: Brush bar blocked is present
04The important observation is when 360 Vis Nav: Brush bar blocked appears and whether the exact published action changes that condition

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — the robot has detected resistance or obstruction at the brush bar
02360 Vis Nav: Brush bar blocked identifies the documented condition, not a confirmed replacement part
03Model boundary — apply this interpretation only to Dyson 360 Vis Nav robot vacuum models covered by the official troubleshooting journey

Safe next steps

  1. 1
    Confirm the exact Dyson Robot vacuum 360 Vis Nav: Brush bar blocked model and displayed code before changing settings.
  2. 2
    Complete only the user-accessible checks described in the linked official source.
  3. 3
    Run one controlled test after the check; if the code returns, stop and use the model manual or qualified service.

Step-by-step diagnosis

  1. 1
    Photograph the complete 360 Vis Nav: Brush bar blocked display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: Dyson 360 Vis Nav robot vacuum models covered by the official troubleshooting journey
  3. 3
    Confirm that the observed condition matches the published meaning: the robot has detected resistance or obstruction at the brush bar
  4. 4
    Published check — Power the robot off, remove only accessible hair and debris from the brush area, refit the brush, and test once
  5. 5
    Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check
  6. 6
    if 360 Vis Nav: Brush bar blocked remains, stop and move to exact-model diagnosis
  7. 7
    Published check — If 360 Vis Nav: Brush bar blocked returns after the listed action, do not repeat the same correction indefinitely
  8. 8
    Published check — continue with exact-model diagnosis
  9. 9
    Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check; if 360 Vis Nav: Brush bar blocked remains, stop and move to exact-model diagnosis

Evidence-backed actions

  1. 1
    Power the robot off, remove only accessible hair and debris from the brush area, refit the brush, and test once
  2. 2
    If 360 Vis Nav: Brush bar blocked returns after the listed action, do not repeat the same correction indefinitely
  3. 3
    continue with exact-model diagnosis
  4. 4
    If 360 Vis Nav: Brush bar blocked returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis

Repair planning

€Cost for the first check
360 Vis Nav: Brush bar blocked cost planning: €0 for the published external correction. If 360 Vis Nav: Brush bar blocked returns afterward, €60–€140 is a typical Europe planning range for diagnosis before parts; it is not Dyson pricing.
⏱Time for the first check
360 Vis Nav: Brush bar blocked time plan: 10–25 minutes for the published external check and one controlled test.
🔧Tools
Exact Dyson model instructions, Only the ordinary hand-access items explicitly named in the published check
▣Parts or consumables
360 Vis Nav: Brush bar blocked parts decision: None for the first external correction. If 360 Vis Nav: Brush bar blocked returns, select a part only after the documented “the robot has detected resistance or obstruction at the brush bar” condition is diagnosed on the full model.

What not to do

  • Do not improvise a component test, force a cover, or repeat the cycle after the same code returns
  • Do not turn 360 Vis Nav: Brush bar blocked into a parts diagnosis
  • the display identifies a condition, not a completed component test
  • Do not turn 360 Vis Nav: Brush bar blocked into a parts diagnosis; the display identifies a condition, not a completed component test

Preventive maintenance

  • 1
    Follow the exact Dyson maintenance schedule for the robot vacuum and keep the model, serial number, and service history available
  • 2
    If 360 Vis Nav: Brush bar blocked begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does 360 Vis Nav: Brush bar blocked identify?

Dyson identifies it as the robot has detected resistance or obstruction at the brush bar.

Which action is actually supported for 360 Vis Nav: Brush bar blocked?

Power the robot off, remove only accessible hair and debris from the brush area, refit the brush, and test once; If 360 Vis Nav: Brush bar blocked returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis.

What result matters after the 360 Vis Nav: Brush bar blocked check?

Whether the documented condition clears after the listed action. If it remains or returns, the exact model needs further diagnosis.

Does 360 Vis Nav: Brush bar blocked prove which part failed?

No. It identifies “the robot has detected resistance or obstruction at the brush bar”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The 360 Vis Nav: Brush bar blocked photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.