Dyson · Robot vacuum · Fault guide

Dyson Robot vacuum 360 Vis Nav: Brush bar not fitted error

Error360 Vis Nav: Brush bar not fitted

360 Vis Nav: Brush bar not fitted is identified by Dyson support as the robot cannot confirm the brush bar is installed. Follow the official, model-scoped checks and service boundary below.

Quick answer

What 360 Vis Nav: Brush bar not fitted means

Dyson Robot vacuum 360 Vis Nav: Brush bar not fitted: the robot cannot confirm the brush bar is installed. This interpretation applies to Dyson 360 Vis Nav robot vacuum models covered by the official troubleshooting journey in United States / English.

Model scope
Dyson 360 Vis Nav robot vacuum models covered by the official troubleshooting journey
Region
United States / English
Verified
✓

Primary evidence: Dyson official 360 Vis Nav robot vacuum troubleshooting.

Open official source ↗
✓
What the code means

the robot cannot confirm the brush bar is installed

Follow the exact model manual. Switch off, refit the brush bar as Dyson shows, and contact support if the fitted brush is not recognised. Do not open fixed panels or test live circuits.

Typical symptoms

01360 Vis Nav: Brush bar not fitted is shown on the Dyson robot vacuum display, indicator, or connected app
02The published condition is: the robot cannot confirm the brush bar is installed
03The affected function behaves as described by the manufacturer while 360 Vis Nav: Brush bar not fitted is present
04The important observation is when 360 Vis Nav: Brush bar not fitted appears and whether the exact published action changes that condition

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — the robot cannot confirm the brush bar is installed
02360 Vis Nav: Brush bar not fitted identifies the documented condition, not a confirmed replacement part
03Model boundary — apply this interpretation only to Dyson 360 Vis Nav robot vacuum models covered by the official troubleshooting journey

Safe next steps

  1. 1
    Confirm the exact Dyson Robot vacuum 360 Vis Nav: Brush bar not fitted model and displayed code before changing settings.
  2. 2
    Complete only the user-accessible checks described in the linked official source.
  3. 3
    Run one controlled test after the check; if the code returns, stop and use the model manual or qualified service.

Step-by-step diagnosis

  1. 1
    Photograph the complete 360 Vis Nav: Brush bar not fitted display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: Dyson 360 Vis Nav robot vacuum models covered by the official troubleshooting journey
  3. 3
    Confirm that the observed condition matches the published meaning: the robot cannot confirm the brush bar is installed
  4. 4
    Published check — Switch off, refit the brush bar as Dyson shows, and contact support if the fitted brush is not recognised
  5. 5
    Stop at the published service boundary after these actions
  6. 6
    do not add a restart or test cycle that Dyson does not specify for 360 Vis Nav: Brush bar not fitted
  7. 7
    Published check — Give service the 360 Vis Nav: Brush bar not fitted photo, full model and serial number, when it appeared, and the result of every published external check
  8. 8
    Stop at the published service boundary after these actions; do not add a restart or test cycle that Dyson does not specify for 360 Vis Nav: Brush bar not fitted

Evidence-backed actions

  1. 1
    Switch off, refit the brush bar as Dyson shows, and contact support if the fitted brush is not recognised
  2. 2
    Give service the 360 Vis Nav: Brush bar not fitted photo, full model and serial number, when it appeared, and the result of every published external check

Repair planning

€Cost for the first check
360 Vis Nav: Brush bar not fitted cost planning: €0 for the published external correction. If 360 Vis Nav: Brush bar not fitted returns afterward, €60–€140 is a typical Europe planning range for diagnosis before parts; it is not Dyson pricing.
⏱Time for the first check
360 Vis Nav: Brush bar not fitted time plan: 10–25 minutes for the published external check and one controlled test.
🔧Tools
Exact Dyson model instructions, Only the ordinary hand-access items explicitly named in the published check
▣Parts or consumables
360 Vis Nav: Brush bar not fitted parts decision: None for the first external correction. If 360 Vis Nav: Brush bar not fitted returns, select a part only after the documented “the robot cannot confirm the brush bar is installed” condition is diagnosed on the full model.

What not to do

  • Do not improvise a component test, force a cover, or repeat the cycle after the same code returns
  • Do not run an extra test cycle after the source tells you to stop or arrange service for 360 Vis Nav: Brush bar not fitted

Preventive maintenance

  • 1
    Follow the exact Dyson maintenance schedule for the robot vacuum and keep the model, serial number, and service history available
  • 2
    If 360 Vis Nav: Brush bar not fitted begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does 360 Vis Nav: Brush bar not fitted identify?

Dyson identifies it as the robot cannot confirm the brush bar is installed.

Which action is actually supported for 360 Vis Nav: Brush bar not fitted?

Switch off, refit the brush bar as Dyson shows, and contact support if the fitted brush is not recognised; Give service the 360 Vis Nav: Brush bar not fitted photo, full model and serial number, when it appeared, and the result of every published external check.

Can I run another test after 360 Vis Nav: Brush bar not fitted?

Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.

Does 360 Vis Nav: Brush bar not fitted prove which part failed?

No. It identifies “the robot cannot confirm the brush bar is installed”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The 360 Vis Nav: Brush bar not fitted photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.