Dyson · Robot vacuum · Fault guide

Dyson Robot vacuum 360 Vis Nav: Map unavailable error

Error360 Vis Nav: Map unavailable

360 Vis Nav: Map unavailable is identified by Dyson support as the robot cannot access its saved cleaning map. Follow the official, model-scoped checks and service boundary below.

Quick answer

What 360 Vis Nav: Map unavailable means

Dyson Robot vacuum 360 Vis Nav: Map unavailable: the robot cannot access its saved cleaning map. This interpretation applies to Dyson 360 Vis Nav robot vacuum models covered by the official troubleshooting journey in United States / English.

Model scope
Dyson 360 Vis Nav robot vacuum models covered by the official troubleshooting journey
Region
United States / English
Verified
✓

Primary evidence: Dyson official 360 Vis Nav robot vacuum troubleshooting.

Open official source ↗
✓
What the code means

the robot cannot access its saved cleaning map

Follow the exact model manual. Check the MyDyson app connection and dock location, then allow the robot to rebuild or reload its map as Dyson directs. Do not open fixed panels or test live circuits.

Typical symptoms

01360 Vis Nav: Map unavailable is shown on the Dyson robot vacuum display, indicator, or connected app
02The published condition is: the robot cannot access its saved cleaning map
03Charging does not start, continue, or complete in the way described for 360 Vis Nav: Map unavailable
04The important observation is when 360 Vis Nav: Map unavailable appears and whether the exact published action changes that condition

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — the robot cannot access its saved cleaning map
02360 Vis Nav: Map unavailable does not alone distinguish battery condition, seating, contacts, dock, charger, temperature, or charging electronics
03Model boundary — apply this interpretation only to Dyson 360 Vis Nav robot vacuum models covered by the official troubleshooting journey

Safe next steps

  1. 1
    Confirm the exact Dyson Robot vacuum 360 Vis Nav: Map unavailable model and displayed code before changing settings.
  2. 2
    Complete only the user-accessible checks described in the linked official source.
  3. 3
    Run one controlled test after the check; if the code returns, stop and use the model manual or qualified service.

Step-by-step diagnosis

  1. 1
    Photograph the complete 360 Vis Nav: Map unavailable display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: Dyson 360 Vis Nav robot vacuum models covered by the official troubleshooting journey
  3. 3
    Confirm that the observed condition matches the published meaning: the robot cannot access its saved cleaning map
  4. 4
    Published check — Check the MyDyson app connection and dock location, then allow the robot to rebuild or reload its map as Dyson directs
  5. 5
    Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check
  6. 6
    if 360 Vis Nav: Map unavailable remains, stop and move to exact-model diagnosis
  7. 7
    Published check — If 360 Vis Nav: Map unavailable returns after the listed action, do not repeat the same correction indefinitely
  8. 8
    Published check — continue with exact-model diagnosis
  9. 9
    Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check; if 360 Vis Nav: Map unavailable remains, stop and move to exact-model diagnosis

Evidence-backed actions

  1. 1
    Check the MyDyson app connection and dock location, then allow the robot to rebuild or reload its map as Dyson directs
  2. 2
    If 360 Vis Nav: Map unavailable returns after the listed action, do not repeat the same correction indefinitely
  3. 3
    continue with exact-model diagnosis
  4. 4
    If 360 Vis Nav: Map unavailable returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis

Repair planning

€Cost for the first check
360 Vis Nav: Map unavailable cost planning: €0 for cleaning, reseating, or temperature recovery; an exact-model battery commonly costs €35–€130. Charging-board or dock diagnosis is commonly €60–€140 before parts.
⏱Time for the first check
360 Vis Nav: Map unavailable time plan: 10–20 minutes for dry contact, seating, and connection checks; add the manufacturer-specified cooling or charging wait before retesting.
🔧Tools
Dry microfiber cloth for charging contacts, Exact-model battery removal instructions, No live electrical test equipment
▣Parts or consumables
360 Vis Nav: Map unavailable parts decision: Use only the exact-model battery or charging accessory approved by Dyson, and only when the published procedure or a confirmed diagnosis requires replacement.

What not to do

  • Do not charge a wet, swollen, damaged, very hot, or very cold battery
  • Do not substitute an unapproved charger or bridge charging contacts
  • Do not turn 360 Vis Nav: Map unavailable into a parts diagnosis
  • the display identifies a condition, not a completed component test
  • Do not turn 360 Vis Nav: Map unavailable into a parts diagnosis; the display identifies a condition, not a completed component test

Preventive maintenance

  • 1
    Keep charging contacts clean and dry, store and charge the battery within the specified temperature range, and use only approved charging accessories
  • 2
    If 360 Vis Nav: Map unavailable begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does 360 Vis Nav: Map unavailable identify?

Dyson identifies it as the robot cannot access its saved cleaning map.

Which action is actually supported for 360 Vis Nav: Map unavailable?

Check the MyDyson app connection and dock location, then allow the robot to rebuild or reload its map as Dyson directs; If 360 Vis Nav: Map unavailable returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis.

What result matters after the 360 Vis Nav: Map unavailable check?

Whether the documented condition clears after the listed action. If it remains or returns, the exact model needs further diagnosis.

Does 360 Vis Nav: Map unavailable prove which part failed?

No. It identifies “the robot cannot access its saved cleaning map”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The 360 Vis Nav: Map unavailable photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.