Electrolux · Dishwasher · Fault guide

Electrolux Dishwasher PF error

ErrorPF

PF is identified by Electrolux support as the dishwasher lost power. Follow the official, model-scoped checks and service boundary below.

Quick answer

What PF means

Electrolux Dishwasher PF: the dishwasher lost power. This interpretation applies to Electrolux US dishwashers covered by the linked official error-code and alarm guide in United States / English.

Model scope
Electrolux US dishwashers covered by the linked official error-code and alarm guide
Region
United States / English
Verified
✓

Primary evidence: Electrolux US dishwasher error-code and alarm guide.

Open official source ↗
✓
What the code means

the dishwasher lost power

Follow the exact model manual. acknowledge the power-failure display and check the supply before starting one new cycle Do not open fixed panels or test live circuits.

Typical symptoms

01PF is shown on the Electrolux dishwasher display, indicator, or connected app
02The published condition is: the dishwasher lost power
03The affected function behaves as described by the manufacturer while PF is present
04The important observation is when PF appears and whether the exact published action changes that condition

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — the dishwasher lost power
02PF identifies the documented condition, not a confirmed replacement part
03Model boundary — apply this interpretation only to Electrolux US dishwashers covered by the linked official error-code and alarm guide

Safe next steps

  1. 1
    Confirm the exact Electrolux Dishwasher PF model and displayed code before changing settings.
  2. 2
    Complete only the user-accessible checks described in the linked official source.
  3. 3
    Run one controlled test after the check; if the code returns, stop and use the model manual or qualified service.

Step-by-step diagnosis

  1. 1
    Photograph the complete PF display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: Electrolux US dishwashers covered by the linked official error-code and alarm guide
  3. 3
    Confirm that the observed condition matches the published meaning: the dishwasher lost power
  4. 4
    Published check — acknowledge the power-failure display and check the supply before starting one new cycle
  5. 5
    Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check
  6. 6
    if PF remains, stop and move to exact-model diagnosis
  7. 7
    Published check — If PF returns after the listed action, do not repeat the same correction indefinitely
  8. 8
    Published check — continue with exact-model diagnosis
  9. 9
    Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check; if PF remains, stop and move to exact-model diagnosis

Evidence-backed actions

  1. 1
    acknowledge the power-failure display and check the supply before starting one new cycle
  2. 2
    If PF returns after the listed action, do not repeat the same correction indefinitely
  3. 3
    continue with exact-model diagnosis
  4. 4
    If PF returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis

Repair planning

€Cost for the first check
PF cost planning: €0 for the published external correction. If PF returns afterward, €90–€220 is a typical Europe planning range for diagnosis before parts; it is not Electrolux pricing.
⏱Time for the first check
PF time plan: 10–25 minutes for the published external check and one controlled test.
🔧Tools
Exact Electrolux model instructions, Only the ordinary hand-access items explicitly named in the published check
▣Parts or consumables
PF parts decision: None for the first external correction. If PF returns, select a part only after the documented “the dishwasher lost power” condition is diagnosed on the full model.

What not to do

  • Do not improvise a component test, force a cover, or repeat the cycle after the same code returns
  • Do not turn PF into a parts diagnosis
  • the display identifies a condition, not a completed component test
  • Do not turn PF into a parts diagnosis; the display identifies a condition, not a completed component test

Preventive maintenance

  • 1
    Follow the exact Electrolux maintenance schedule for the dishwasher and keep the model, serial number, and service history available
  • 2
    If PF begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does PF identify?

Electrolux identifies it as the dishwasher lost power.

Which action is actually supported for PF?

acknowledge the power-failure display and check the supply before starting one new cycle; If PF returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis.

What result matters after the PF check?

Whether the documented condition clears after the listed action. If it remains or returns, the exact model needs further diagnosis.

Does PF prove which part failed?

No. It identifies “the dishwasher lost power”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The PF photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.