Electrolux Refrigerator SB error
SB is identified by Electrolux support as Sabbath mode is active. Follow the official, model-scoped checks and service boundary below.
What SB means
Electrolux Refrigerator SB: Sabbath mode is active. This interpretation applies to Electrolux US refrigerators covered by the linked official error-code and alarm guide in United States / English.
- Model scope
- Electrolux US refrigerators covered by the linked official error-code and alarm guide
- Region
- United States / English
- Verified
Sabbath mode is active
Follow the exact model manual. use the official simultaneous-button sequence to turn Sabbath mode off Do not open fixed panels or test live circuits.
Typical symptoms
Fault area and what the code does not prove
Separate the manufacturer-defined condition from components that still need exact-model diagnosis.
Safe next steps
- 1Confirm the exact Electrolux Refrigerator SB model and displayed code before changing settings.
- 2Complete only the user-accessible checks described in the linked official source.
- 3Run one controlled test after the check; if the code returns, stop and use the model manual or qualified service.
Step-by-step diagnosis
- 1Photograph the complete SB display before changing controls or removing power
- 2Confirm that the full model number is covered by this scope: Electrolux US refrigerators covered by the linked official error-code and alarm guide
- 3Confirm that the observed condition matches the published meaning: Sabbath mode is active
- 4Published check — use the official simultaneous-button sequence to turn Sabbath mode off
- 5Treat SB as normal only while the observed operation matches “Sabbath mode is active”
- 6a different symptom needs separate diagnosis
- 7Published check — No component repair is indicated while SB remains the documented status “Sabbath mode is active”
- 8Treat SB as normal only while the observed operation matches “Sabbath mode is active”; a different symptom needs separate diagnosis
What to do
- 1use the official simultaneous-button sequence to turn Sabbath mode off
- 2No component repair is indicated while SB remains the documented status “Sabbath mode is active”
Action details
SB cost planning: €0 for the control or setting correction. If the controls remain unresponsive afterward, €110–€250 is a typical Europe planning range for diagnosis before parts; it is not Electrolux pricing.
SB time plan: 1–5 minutes for the control sequence and one response check.
No tools required, Use the exact-model control labels shown in the official instructions
SB parts decision: None for the published SB control procedure.
What not to do
- Do not force a key, pry up the control panel, or repeat the key sequence rapidly if the display does not respond
- Do not order a part or interrupt normal operation solely because SB is displayed
Preventive maintenance
- 1Learn the model's normal indicators and control-lock sequence so a status message is not mistaken for a hardware fault
- 2Record a change in behavior rather than treating the normal SB state itself as a maintenance fault
Frequently asked questions
What exactly does SB identify?
Electrolux identifies it as Sabbath mode is active.
Which action is actually supported for SB?
use the official simultaneous-button sequence to turn Sabbath mode off; No component repair is indicated while SB remains the documented status “Sabbath mode is active”.
What result matters after the SB check?
Whether the documented condition clears after the listed action. If it remains or returns, the exact model needs further diagnosis.
Does SB prove which part failed?
No. It identifies “Sabbath mode is active”; parts are selected only after the exact model and failed function are confirmed.
What information should accompany a service request?
The SB photo, full model and serial number, the operating stage when it appeared, and the result of each published check.
Did this guide fix your appliance?
Your anonymous response helps us show which repairs work in the real world. One current response is kept per guide.