GE Appliances · Dishwasher · Status guide

GE Appliances Dishwasher 1H error

Indicator1H

1H is identified by GE Appliances' official support as Delay Start mode is active. Follow the model-scoped checks and service boundary below.

Quick answer

What 1H means

GE Appliances Dishwasher 1H: Delay Start mode is active. This interpretation applies to GE Appliances dishwasher models covered by the official Dishwasher fault-code article; not every code appears on every model in United States / English.

Model scope
GE Appliances dishwasher models covered by the official Dishwasher fault-code article; not every code appears on every model
Region
United States / English
Verified
✓

Primary evidence: GE Appliances dishwasher error-code support.

Open official source ↗
✓
What the code means

Delay Start mode is active

Cancel Delay Start or select the desired cycle using the exact model controls; contact GE support if 1H remains unexpectedly. Do not open fixed panels or test live circuits.

Typical symptoms

011H is shown on the GE Appliances dishwasher display, indicator, or connected app
02The published condition is: Delay Start mode is active
03The controls show the documented lock, pause, or setting state until the exact published control action is completed
04If operation no longer matches that description, record the new symptom instead of treating the normal 1H state as the diagnosis

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — Delay Start mode is active
021H does not prove a failed control board while the documented control state is active
03Model boundary — apply this interpretation only to GE Appliances dishwasher models covered by the official Dishwasher fault-code article; not every code appears on every model

Safe next steps

  1. 1
    Confirm the exact GE Appliances Dishwasher 1H model and displayed code before changing settings.
  2. 2
    Complete only the user-accessible checks described in the linked official source.
  3. 3
    Run one controlled test after the check; if the code returns, stop and use the model manual or qualified service.

Step-by-step diagnosis

  1. 1
    Photograph the complete 1H display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: GE Appliances dishwasher models covered by the official Dishwasher fault-code article; not every code appears on every model
  3. 3
    Confirm that the observed condition matches the published meaning: Delay Start mode is active
  4. 4
    Confirm that the full model number is covered by this scope: GE Appliances dishwasher models covered by the official Dishwasher fault-code article
  5. 5
    not every code appears on every model
  6. 6
    Published check — Cancel Delay Start or select the desired cycle using the exact model controls
  7. 7
    Published check — contact GE support if 1H remains unexpectedly
  8. 8
    Treat 1H as normal only while the observed operation matches “Delay Start mode is active”
  9. 9
    a different symptom needs separate diagnosis
  10. 10
    Published check — No component repair is indicated while 1H remains the documented status “Delay Start mode is active”

What to do

  1. 1
    Cancel Delay Start or select the desired cycle using the exact model controls
  2. 2
    contact GE support if 1H remains unexpectedly
  3. 3
    No component repair is indicated while 1H remains the documented status “Delay Start mode is active”

Action details

€Cost for the first check
1H cost planning: €0 for the control or setting correction. If the controls remain unresponsive afterward, €90–€220 is a typical Europe planning range for diagnosis before parts; it is not GE Appliances pricing.
⏱Time for the first check
1H time plan: 1–5 minutes for the control sequence and one response check.
🔧Tools
No tools required, Use the exact-model control labels shown in the official instructions
▣Parts or consumables
1H parts decision: None for the published 1H control procedure.

What not to do

  • Do not force a key, pry up the control panel, or repeat the key sequence rapidly if the display does not respond
  • Do not order a part or interrupt normal operation solely because 1H is displayed

Preventive maintenance

  • 1
    Learn the model's normal indicators and control-lock sequence so a status message is not mistaken for a hardware fault
  • 2
    Record a change in behavior rather than treating the normal 1H state itself as a maintenance fault

Frequently asked questions

What exactly does 1H identify?

GE Appliances identifies it as Delay Start mode is active.

Which action is actually supported for 1H?

Cancel Delay Start or select the desired cycle using the exact model controls; contact GE support if 1H remains unexpectedly; No component repair is indicated while 1H remains the documented status “Delay Start mode is active”.

Can I run another test after 1H?

Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.

Does 1H prove which part failed?

No. It identifies “Delay Start mode is active”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The 1H photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.