GE Appliances Dishwasher PrS error
PrS is identified by GE Appliances' official support as the pressure sensor is sending an invalid signal. Follow the model-scoped checks and service boundary below.
What PrS means
GE Appliances Dishwasher PrS: the pressure sensor is sending an invalid signal. This interpretation applies to GE Appliances dishwasher models covered by the official Dishwasher fault-code article; not every code appears on every model in United States / English.
- Model scope
- GE Appliances dishwasher models covered by the official Dishwasher fault-code article; not every code appears on every model
- Region
- United States / English
- Verified
the pressure sensor is sending an invalid signal
Stop using the dishwasher and arrange service; do not open the harness or pressure-sensor circuit from PrS alone. Do not open fixed panels or test live circuits.
Typical symptoms
Fault area and what the code does not prove
Separate the manufacturer-defined condition from components that still need exact-model diagnosis.
Safe next steps
- 1Confirm the exact GE Appliances Dishwasher PrS model and displayed code before taking action.
- 2Keep the appliance in a safe state and use only the external checks named in the official source.
- 3If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.
Step-by-step diagnosis
- 1Photograph the complete PrS display before changing controls or removing power
- 2Confirm that the full model number is covered by this scope: GE Appliances dishwasher models covered by the official Dishwasher fault-code article; not every code appears on every model
- 3Confirm that the observed condition matches the published meaning: the pressure sensor is sending an invalid signal
- 4Confirm that the full model number is covered by this scope: GE Appliances dishwasher models covered by the official Dishwasher fault-code article
- 5not every code appears on every model
- 6Published check — Stop using the dishwasher and arrange service
- 7Published check — do not open the harness or pressure-sensor circuit from PrS alone
- 8Stop at the published service boundary after these actions
- 9do not add a restart or test cycle that GE Appliances does not specify for PrS
- 10Published check — Give service the PrS photo, full model and serial number, when it appeared, and the result of every published external check
Service-safe actions
- 1Stop using the dishwasher and arrange service
- 2do not open the harness or pressure-sensor circuit from PrS alone
- 3Give service the PrS photo, full model and serial number, when it appeared, and the result of every published external check
Repair planning
PrS cost planning: The source-listed external check costs €0. A qualified sensor-system diagnosis is generally planned within €90–€220 before any model-specific part is approved.
PrS time plan: 10–20 minutes for the documented PrS external check; allow 30–90 minutes for measured sensor, wiring, and control diagnosis.
Photo of the complete PrS display, Full model and serial number, The exact-model manual for the published external check, No live sensor-circuit test equipment
PrS parts decision: PrS describes the pressure sensor is sending an invalid signal; it does not prove the sensor itself has failed. A blocked path, connector, wiring, control input, or the measured condition can produce the same reported area.
What not to do
- Do not bridge, heat, cool, wet, or electrically probe a sensor to clear PrS
- Do not replace a sensor until its circuit and the condition it measures have been checked
- Do not run an extra test cycle after the source tells you to stop or arrange service for PrS
Preventive maintenance
- 1Follow the exact GE Appliances maintenance schedule for the dishwasher and keep the model, serial number, and service history available
- 2If PrS begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis
Frequently asked questions
What exactly does PrS identify?
GE Appliances identifies it as the pressure sensor is sending an invalid signal.
Which action is actually supported for PrS?
Stop using the dishwasher and arrange service; do not open the harness or pressure-sensor circuit from PrS alone; Give service the PrS photo, full model and serial number, when it appeared, and the result of every published external check.
Can I run another test after PrS?
Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.
Does PrS prove which part failed?
No. It identifies “the pressure sensor is sending an invalid signal”; parts are selected only after the exact model and failed function are confirmed.
What information should accompany a service request?
The PrS photo, full model and serial number, the operating stage when it appeared, and the result of each published check.
Did this guide fix your appliance?
Your anonymous response helps us show which repairs work in the real world. One current response is kept per guide.