GE Appliances · Microwave · Fault guide

GE Appliances Microwave Probe error

ErrorProbe

Probe is identified by GE Appliances' official support as the temperature probe is open or not connected during temperature cooking. Follow the model-scoped checks and service boundary below.

Quick answer

What Probe means

GE Appliances Microwave Probe: the temperature probe is open or not connected during temperature cooking. This interpretation applies to GE Appliances microwave-oven models covered by the official Microwave fault-code article in United States / English.

Model scope
GE Appliances microwave-oven models covered by the official Microwave fault-code article
Region
United States / English
Verified
✓

Primary evidence: GE Appliances microwave error-code support.

Open official source ↗
✓
What the code means

the temperature probe is open or not connected during temperature cooking

Stop the temperature-cook function, check that the probe is firmly inserted as the manual shows, and arrange service if Probe remains. Do not open fixed panels or test live circuits.

Typical symptoms

01Probe is shown on the GE Appliances microwave display, indicator, or connected app
02The published condition is: the temperature probe is open or not connected during temperature cooking
03The control cannot confirm the documented measured condition or sensor reference represented by Probe
04The important observation is when Probe appears and whether the exact published action changes that condition

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — the temperature probe is open or not connected during temperature cooking
02Probe identifies a measured-condition or sensor path, not a completed proof that the sensor itself failed
03Model boundary — apply this interpretation only to GE Appliances microwave-oven models covered by the official Microwave fault-code article

Safe next steps

  1. 1
    Confirm the exact GE Appliances Microwave Probe model and displayed code before changing settings.
  2. 2
    Complete only the user-accessible checks described in the linked official source.
  3. 3
    Run one controlled test after the check; if the code returns, stop and use the model manual or qualified service.

Step-by-step diagnosis

  1. 1
    Photograph the complete Probe display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: GE Appliances microwave-oven models covered by the official Microwave fault-code article
  3. 3
    Confirm that the observed condition matches the published meaning: the temperature probe is open or not connected during temperature cooking
  4. 4
    Published check — Stop the temperature-cook function, check that the probe is firmly inserted as the manual shows, and arrange service if Probe remains
  5. 5
    Stop at the published service boundary after these actions
  6. 6
    do not add a restart or test cycle that GE Appliances does not specify for Probe
  7. 7
    Published check — Give service the Probe photo, full model and serial number, when it appeared, and the result of every published external check
  8. 8
    Stop at the published service boundary after these actions; do not add a restart or test cycle that GE Appliances does not specify for Probe

Evidence-backed actions

  1. 1
    Stop the temperature-cook function, check that the probe is firmly inserted as the manual shows, and arrange service if Probe remains
  2. 2
    Give service the Probe photo, full model and serial number, when it appeared, and the result of every published external check

Repair planning

€Cost for the first check
Probe cost planning: The source-listed external check costs €0. A qualified sensor-system diagnosis is generally planned within €90–€220 before any model-specific part is approved.
⏱Time for the first check
Probe time plan: 10–20 minutes for the documented Probe external check; allow 30–90 minutes for measured sensor, wiring, and control diagnosis.
🔧Tools
Photo of the complete Probe display, Full model and serial number, The exact-model manual for the published external check, No live sensor-circuit test equipment
▣Parts or consumables
Probe parts decision: Probe describes the temperature probe is open or not connected during temperature cooking; it does not prove the sensor itself has failed. A blocked path, connector, wiring, control input, or the measured condition can produce the same reported area.

What not to do

  • Do not bridge, heat, cool, wet, or electrically probe a sensor to clear Probe
  • Do not replace a sensor until its circuit and the condition it measures have been checked
  • Do not run an extra test cycle after the source tells you to stop or arrange service for Probe

Preventive maintenance

  • 1
    Follow the exact GE Appliances maintenance schedule for the microwave and keep the model, serial number, and service history available
  • 2
    If Probe begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does Probe identify?

GE Appliances identifies it as the temperature probe is open or not connected during temperature cooking.

Which action is actually supported for Probe?

Stop the temperature-cook function, check that the probe is firmly inserted as the manual shows, and arrange service if Probe remains; Give service the Probe photo, full model and serial number, when it appeared, and the result of every published external check.

Can I run another test after Probe?

Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.

Does Probe prove which part failed?

No. It identifies “the temperature probe is open or not connected during temperature cooking”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The Probe photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.