GE Appliances Washer/dryer combo Load Sensing error

Typical symptoms

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

Safe next steps

1. 1
   Confirm the exact GE Appliances Washer/dryer combo Load Sensing model and displayed code before changing settings.
2. 2
   Complete only the user-accessible checks described in the linked official source.
3. 3
   Run one controlled test after the check; if the code returns, stop and use the model manual or qualified service.

Step-by-step diagnosis

1. 1
   Photograph the complete Load Sensing display before changing controls or removing power
2. 2
   Confirm that the full model number is covered by this scope: GE Profile UltraFast Combo washer/dryer models covered by the official status article
3. 3
   Confirm that the observed condition matches the published meaning: the Combo is measuring moisture near the end of drying
4. 4
   Published check — Allow the load-sensing stage to finish
5. 5
   Published check — do not interrupt the cycle unless the exact manual directs it
6. 6
   Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check
7. 7
   if Load Sensing remains, stop and move to exact-model diagnosis
8. 8
   Published check — If Load Sensing returns after the listed action, do not repeat the same correction indefinitely
9. 9
   Published check — continue with exact-model diagnosis
10. 10
    Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check; if Load Sensing remains, stop and move to exact-model diagnosis

Evidence-backed actions

1. 1
   Allow the load-sensing stage to finish
2. 2
   do not interrupt the cycle unless the exact manual directs it
3. 3
   If Load Sensing returns after the listed action, do not repeat the same correction indefinitely
4. 4
   continue with exact-model diagnosis
5. 5
   If Load Sensing returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis

Repair planning

Preventive maintenance

• 1
  Follow the exact GE Appliances maintenance schedule for the washer/dryer combo and keep the model, serial number, and service history available
• 2
  If Load Sensing begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions