Gorenje · Washing machine · Fault guide

Gorenje Washing machine E_AC error

ErrorE_AC

E_AC is identified by Gorenje support as the Anti-crease function is active. Follow the official, model-scoped checks and service boundary below.

Quick answer

What E_AC means

Gorenje Washing machine E_AC: the Anti-crease function is active. This interpretation applies to Gorenje washing-machine models covered by official manual 904001en in Europe / English manual.

Model scope
Gorenje washing-machine models covered by official manual 904001en
Region
Europe / English manual
Verified
✓

Primary evidence: Gorenje official washing-machine manual 904001en.

Open official source ↗
✓
What the code means

the Anti-crease function is active

Follow the exact model manual. Turn the programme selector to OFF to cancel Anti-crease; contact Gorenje service if the display remains active outside that function. Do not open fixed panels or test live circuits.

Typical symptoms

01E_AC is shown on the Gorenje washing machine display, indicator, or connected app
02The published condition is: the Anti-crease function is active
03The affected function behaves as described by the manufacturer while E_AC is present
04The important observation is when E_AC appears and whether the exact published action changes that condition

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — the Anti-crease function is active
02E_AC identifies the documented condition, not a confirmed replacement part
03Model boundary — apply this interpretation only to Gorenje washing-machine models covered by official manual 904001en

Safe next steps

  1. 1
    Confirm the exact Gorenje Washing machine E_AC model and displayed code before changing settings.
  2. 2
    Complete only the user-accessible checks described in the linked official source.
  3. 3
    Run one controlled test after the check; if the code returns, stop and use the model manual or qualified service.

Step-by-step diagnosis

  1. 1
    Photograph the complete E_AC display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: Gorenje washing-machine models covered by official manual 904001en
  3. 3
    Confirm that the observed condition matches the published meaning: the Anti-crease function is active
  4. 4
    Published check — Turn the programme selector to OFF to cancel Anti-crease
  5. 5
    Published check — contact Gorenje service if the display remains active outside that function
  6. 6
    Stop at the published service boundary after these actions
  7. 7
    do not add a restart or test cycle that Gorenje does not specify for E_AC
  8. 8
    Published check — Give service the E_AC photo, full model and serial number, when it appeared, and the result of every published external check
  9. 9
    Stop at the published service boundary after these actions; do not add a restart or test cycle that Gorenje does not specify for E_AC

Evidence-backed actions

  1. 1
    Turn the programme selector to OFF to cancel Anti-crease
  2. 2
    contact Gorenje service if the display remains active outside that function
  3. 3
    Give service the E_AC photo, full model and serial number, when it appeared, and the result of every published external check

Repair planning

€Cost for the first check
E_AC cost planning: €0 for the published external correction. If E_AC returns afterward, €90–€220 is a typical Europe planning range for diagnosis before parts; it is not Gorenje pricing.
⏱Time for the first check
E_AC time plan: 10–25 minutes for the published external check and one controlled test.
🔧Tools
Exact Gorenje model instructions, Only the ordinary hand-access items explicitly named in the published check
▣Parts or consumables
E_AC parts decision: None for the first external correction. If E_AC returns, select a part only after the documented “the Anti-crease function is active” condition is diagnosed on the full model.

What not to do

  • Do not improvise a component test, force a cover, or repeat the cycle after the same code returns
  • Do not run an extra test cycle after the source tells you to stop or arrange service for E_AC

Preventive maintenance

  • 1
    Follow the exact Gorenje maintenance schedule for the washing machine and keep the model, serial number, and service history available
  • 2
    If E_AC begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does E_AC identify?

Gorenje identifies it as the Anti-crease function is active.

Which action is actually supported for E_AC?

Turn the programme selector to OFF to cancel Anti-crease; contact Gorenje service if the display remains active outside that function; Give service the E_AC photo, full model and serial number, when it appeared, and the result of every published external check.

Can I run another test after E_AC?

Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.

Does E_AC prove which part failed?

No. It identifies “the Anti-crease function is active”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The E_AC photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.