Hotpoint Dishwasher F08 error
F08 is identified in Hotpoint's official United Kingdom appliance-specific table as a temperature-timeout fault. Use only the published external check or service boundary below.
a temperature-timeout fault
Follow only the official Hotpoint instructions for the linked United Kingdom appliance table. Book a Hotpoint engineer and quote F08. Do not open fixed panels, test live wiring, or replace an internal component from the displayed code alone. Stop if there is water, heat, smoke, a burning smell, or unsafe electrical behavior.
Typical symptoms
Fault area and what the code does not prove
Separate the manufacturer-defined condition from components that still need exact-model diagnosis.
Safe next steps
- 1Confirm the exact Hotpoint Dishwasher F08 model and displayed code before taking action.
- 2Keep the appliance in a safe state and use only the external checks named in the official source.
- 3If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.
Step-by-step diagnosis
- 1Photograph the complete F08 display before changing controls or removing power
- 2Confirm that the full model number is covered by this scope: Hotpoint dishwasher models covered by the linked UK error-code table
- 3Confirm that the observed condition matches the published meaning: a temperature-timeout fault
- 4Published check — Book a Hotpoint engineer and quote F08
- 5Published check — Do not open fixed panels, test live wiring, or replace an internal component from the displayed code alone
- 6Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check
- 7if F08 remains, stop and move to exact-model diagnosis
- 8Published check — If F08 returns after the listed action, do not repeat the same correction indefinitely
- 9Published check — continue with exact-model diagnosis
- 10Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check; if F08 remains, stop and move to exact-model diagnosis
Service-safe actions
- 1Book a Hotpoint engineer and quote F08
- 2Do not open fixed panels, test live wiring, or replace an internal component from the displayed code alone
- 3If F08 returns after the listed action, do not repeat the same correction indefinitely
- 4continue with exact-model diagnosis
- 5If F08 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis
Repair planning
F08 cost planning: €0 for cooldown and external checks. If F08 returns at normal conditions, €90–€220 is a typical Europe planning range for diagnosis before parts; it is not Hotpoint pricing.
F08 time plan: 15–60 minutes for safe cooldown or temperature normalization; professional electrical diagnosis usually takes 30–90 minutes.
Timer, Exact-model cooldown and ventilation instructions, No live temperature-sensor or mains-voltage test equipment
F08 parts decision: None for cooldown or external ventilation checks. F08 may identify a temperature-related area, but it does not establish the exact sensor, heater, fan, or control part.
What not to do
- Do not defeat thermal protection, apply external heat, test a live sensor circuit, or restart repeatedly before the appliance has cooled
- Do not turn F08 into a parts diagnosis
- the display identifies a condition, not a completed component test
- Do not turn F08 into a parts diagnosis; the display identifies a condition, not a completed component test
Preventive maintenance
- 1Follow the exact Hotpoint maintenance schedule for the dishwasher and keep the model, serial number, and service history available
- 2If F08 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis
Frequently asked questions
What exactly does F08 identify?
Hotpoint identifies it as a temperature-timeout fault.
Which action is actually supported for F08?
Book a Hotpoint engineer and quote F08; Do not open fixed panels, test live wiring, or replace an internal component from the displayed code alone; If F08 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis.
What result matters after the F08 check?
Whether the documented condition clears after the listed action. If it remains or returns, the exact model needs further diagnosis.
Does F08 prove which part failed?
No. It identifies “a temperature-timeout fault”; parts are selected only after the exact model and failed function are confirmed.
What information should accompany a service request?
The F08 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.
Did this guide fix your appliance?
Your anonymous response helps us show which repairs work in the real world. One current response is kept per guide.