LG Refrigerator 22 error
22 is identified by LG support as compressor-relay problem. Follow the official, model-scoped checks and service boundary below.
What 22 means
LG Refrigerator 22: compressor-relay problem. This interpretation applies to LG refrigerator models covered by the linked US refrigerator error-code article in United States / English.
- Model scope
- LG refrigerator models covered by the linked US refrigerator error-code article
- Region
- United States / English
- Verified
compressor-relay problem
Isolate the appliance when safe. Do not test the compressor relay or control wiring; contact LG repair service for the exact model. Do not open fixed panels or test live circuits.
Typical symptoms
Fault area and what the code does not prove
Separate the manufacturer-defined condition from components that still need exact-model diagnosis.
Safe next steps
- 1Confirm the exact LG Refrigerator 22 model and displayed code before taking action.
- 2Keep the appliance in a safe state and use only the external checks named in the official source.
- 3If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.
Step-by-step diagnosis
- 1Photograph the complete 22 display before changing controls or removing power
- 2Confirm that the full model number is covered by this scope: LG refrigerator models covered by the linked US refrigerator error-code article
- 3Confirm that the observed condition matches the published meaning: compressor-relay problem
- 4Published check — Do not test the compressor relay or control wiring
- 5Published check — contact LG repair service for the exact model
- 6Stop at the published service boundary after these actions
- 7do not add a restart or test cycle that LG does not specify for 22
- 8Published check — Give service the 22 photo, full model and serial number, when it appeared, and the result of every published external check
- 9Stop at the published service boundary after these actions; do not add a restart or test cycle that LG does not specify for 22
Service-safe actions
- 1Do not test the compressor relay or control wiring
- 2contact LG repair service for the exact model
- 3Give service the 22 photo, full model and serial number, when it appeared, and the result of every published external check
Repair planning
22 cost planning: The published isolation or cooldown check costs €0. A qualified heating-system diagnosis is generally planned within €110–€250 before parts; request separate heater, sensor, wiring, labor, and call-out lines.
22 time plan: 5–15 minutes for the 22 safety check, plus any documented cooldown; a qualified heating-system diagnosis commonly takes 30–90 minutes before repair.
Phone photo of 22, Full model and serial number, Timer for the one permitted cooldown or test interval, No live heater-circuit test equipment
22 parts decision: 22 points to compressor-relay problem, but it does not prove whether the heater, relay, sensor, wiring, circulation system, or control is responsible. Order only the exact-model part confirmed by diagnosis.
What not to do
- Do not repeat heating cycles, bypass thermal protection, test a live heater or relay, or order a heater from 22 alone
- Do not run an extra test cycle after the source tells you to stop or arrange service for 22
Preventive maintenance
- 1Follow the exact LG maintenance schedule for the refrigerator and keep the model, serial number, and service history available
- 2If 22 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis
Frequently asked questions
What exactly does 22 identify?
LG identifies it as compressor-relay problem.
Which action is actually supported for 22?
Do not test the compressor relay or control wiring; contact LG repair service for the exact model; Give service the 22 photo, full model and serial number, when it appeared, and the result of every published external check.
Can I run another test after 22?
Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.
Does 22 prove which part failed?
No. It identifies “compressor-relay problem”; parts are selected only after the exact model and failed function are confirmed.
What information should accompany a service request?
The 22 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.
Did this guide fix your appliance?
Your anonymous response helps us show which repairs work in the real world. One current response is kept per guide.