LG Refrigerator HS error
HS is identified by LG support as humidity-sensor short or disconnection. Follow the official, model-scoped checks and service boundary below.
What HS means
LG Refrigerator HS: humidity-sensor short or disconnection. This interpretation applies to LG refrigerator models covered by the linked US refrigerator error-code article in United States / English.
- Model scope
- LG refrigerator models covered by the linked US refrigerator error-code article
- Region
- United States / English
- Verified
humidity-sensor short or disconnection
Isolate the appliance when safe. Do not test the humidity-sensor circuit; contact LG repair service for the exact model. Do not open fixed panels or test live circuits.
Typical symptoms
Fault area and what the code does not prove
Separate the manufacturer-defined condition from components that still need exact-model diagnosis.
Safe next steps
- 1Confirm the exact LG Refrigerator HS model and displayed code before taking action.
- 2Keep the appliance in a safe state and use only the external checks named in the official source.
- 3If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.
Step-by-step diagnosis
- 1Photograph the complete HS display before changing controls or removing power
- 2Confirm that the full model number is covered by this scope: LG refrigerator models covered by the linked US refrigerator error-code article
- 3Confirm that the observed condition matches the published meaning: humidity-sensor short or disconnection
- 4Published check — Do not test the humidity-sensor circuit
- 5Published check — contact LG repair service for the exact model
- 6Stop at the published service boundary after these actions
- 7do not add a restart or test cycle that LG does not specify for HS
- 8Published check — Give service the HS photo, full model and serial number, when it appeared, and the result of every published external check
- 9Stop at the published service boundary after these actions; do not add a restart or test cycle that LG does not specify for HS
Service-safe actions
- 1Do not test the humidity-sensor circuit
- 2contact LG repair service for the exact model
- 3Give service the HS photo, full model and serial number, when it appeared, and the result of every published external check
Repair planning
HS cost planning: The source-listed external check costs €0. A qualified sensor-system diagnosis is generally planned within €110–€250 before any model-specific part is approved.
HS time plan: 10–20 minutes for the documented HS external check; allow 30–90 minutes for measured sensor, wiring, and control diagnosis.
Photo of the complete HS display, Full model and serial number, The exact-model manual for the published external check, No live sensor-circuit test equipment
HS parts decision: HS describes humidity-sensor short or disconnection; it does not prove the sensor itself has failed. A blocked path, connector, wiring, control input, or the measured condition can produce the same reported area.
What not to do
- Do not bridge, heat, cool, wet, or electrically probe a sensor to clear HS
- Do not replace a sensor until its circuit and the condition it measures have been checked
- Do not run an extra test cycle after the source tells you to stop or arrange service for HS
Preventive maintenance
- 1Follow the exact LG maintenance schedule for the refrigerator and keep the model, serial number, and service history available
- 2If HS begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis
Frequently asked questions
What exactly does HS identify?
LG identifies it as humidity-sensor short or disconnection.
Which action is actually supported for HS?
Do not test the humidity-sensor circuit; contact LG repair service for the exact model; Give service the HS photo, full model and serial number, when it appeared, and the result of every published external check.
Can I run another test after HS?
Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.
Does HS prove which part failed?
No. It identifies “humidity-sensor short or disconnection”; parts are selected only after the exact model and failed function are confirmed.
What information should accompany a service request?
The HS photo, full model and serial number, the operating stage when it appeared, and the result of each published check.
Did this guide fix your appliance?
Your anonymous response helps us show which repairs work in the real world. One current response is kept per guide.