LG · Washing machine · Fault guide

LG Washing machine FE error

ErrorFE

FE is identified by LG support as an overfill condition. Follow the official, model-scoped checks and service boundary below.

Quick answer

What FE means

LG Washing machine FE: an overfill condition. This interpretation applies to LG front-load washer models covered by the linked LG USA error-code article in United States / English.

Model scope
LG front-load washer models covered by the linked LG USA error-code article
Region
United States / English
Verified
✓

Primary evidence: LG USA official front-load washer error-code list.

Open official source ↗
!
Stop and make safe

an overfill condition

Isolate the appliance when safe. Turn off the water supply, do not run another cycle, and request LG service if FE returns after the water level is safe. Do not open fixed panels or test live circuits.

Typical symptoms

01FE appears on the washing machine display
02The an overfill condition condition may stop, pause, or limit the appliance
03The same code returns when the model-specific condition remains active

Likely causes

Start with the least invasive explanation and stop if the check requires internal electrical or sealed-system access.

01an overfill condition
02The exact model manual must be used before any internal diagnosis

Safe next steps

  1. 1
    Confirm the exact LG Washing machine FE model and displayed code before taking action.
  2. 2
    Keep the appliance in a safe state and use only the external checks named in the official source.
  3. 3
    If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.

Step-by-step diagnosis

  1. 1
    Photograph the complete FE display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: LG front-load washer models covered by the linked LG USA error-code article
  3. 3
    Confirm that the observed condition matches the published meaning: an overfill condition
  4. 4
    Published check — Turn off the water supply, do not run another cycle, and request LG service if FE returns after the water level is safe
  5. 5
    Stop at the published service boundary after these actions
  6. 6
    do not add a restart or test cycle that LG does not specify for FE
  7. 7
    Published check — Give service the FE photo, full model and serial number, when it appeared, and the result of every published external check
  8. 8
    Stop at the published service boundary after these actions; do not add a restart or test cycle that LG does not specify for FE

Service-safe actions

  1. 1
    Turn off the water supply, do not run another cycle, and request LG service if FE returns after the water level is safe
  2. 2
    Give service the FE photo, full model and serial number, when it appeared, and the result of every published external check

Repair planning

€Cost for the first check
FE cost planning: €0 to open valves, straighten hoses, or clean an accessible screen; typically €15–€60 for a confirmed replacement inlet hose. If FE returns with normal supply, €90–€220 is a typical Europe planning range for diagnosis before parts; it is not LG pricing.
⏱Time for the first check
FE time plan: 10–25 minutes for supply, hose, and accessible-screen checks plus one short fill test.
🔧Tools
Dry towels and a shallow tray, Soft brush for a user-accessible inlet screen only, Hand access to the household water valves
▣Parts or consumables
FE parts decision: Usually none for the first check. Replace an inlet hose only if it is visibly damaged and the exact LG model specification confirms the correct hose.

What not to do

  • Close the water valves before disconnecting a hose
  • Do not probe the inlet valve electrically or run repeated fill tests if a connection leaks
  • Do not run an extra test cycle after the source tells you to stop or arrange service for FE

Preventive maintenance

  • 1
    Keep inlet hoses unkinked, close household valves before hose work, and clean only user-accessible inlet screens at the exact-model interval
  • 2
    If FE begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does FE identify?

LG identifies it as an overfill condition.

Which action is actually supported for FE?

Turn off the water supply, do not run another cycle, and request LG service if FE returns after the water level is safe; Give service the FE photo, full model and serial number, when it appeared, and the result of every published external check.

Can I run another test after FE?

Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.

Does FE prove which part failed?

No. It identifies “an overfill condition”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The FE photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.