Midea · Air conditioner · Fault guide

Midea Air conditioner PC 00 error

ErrorPC 00

PC 00 is identified by Midea support as IPM malfunction or IGBT over-current protection. Follow the official, model-scoped checks and service boundary below.

Quick answer

What PC 00 means

Midea Air conditioner PC 00: IPM malfunction or IGBT over-current protection. This interpretation applies to Midea MSEPB-09CRFN8-QD3W residential inverter air-conditioner series covered by the linked official service manual in Singapore / English service manual.

Model scope
Midea MSEPB-09CRFN8-QD3W residential inverter air-conditioner series covered by the linked official service manual
Region
Singapore / English service manual
Verified
✓

Primary evidence: Midea MSEPB-09CRFN8-QD3W official inverter service manual.

Open official source ↗
!
Stop and make safe

IPM malfunction or IGBT over-current protection

Isolate the appliance when safe. Stop repeated testing, record PC 00 and the full model number, and arrange Midea service; do not open fixed panels or test live circuits. Do not open fixed panels or test live circuits.

Typical symptoms

01PC 00 is shown on the Midea air conditioner display, indicator, or connected app
02The published condition is: IPM malfunction or IGBT over-current protection
03The appliance has reached the manufacturer-defined stop or service condition associated with PC 00
04The important observation is when PC 00 appears and whether the exact published action changes that condition

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — IPM malfunction or IGBT over-current protection
02PC 00 defines a service boundary; the failed internal part still requires exact-model diagnosis
03Model boundary — apply this interpretation only to Midea MSEPB-09CRFN8-QD3W residential inverter air-conditioner series covered by the linked official service manual

Safe next steps

  1. 1
    Confirm the exact Midea Air conditioner PC 00 model and displayed code before taking action.
  2. 2
    Keep the appliance in a safe state and use only the external checks named in the official source.
  3. 3
    If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.

Step-by-step diagnosis

  1. 1
    Photograph the complete PC 00 display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: Midea MSEPB-09CRFN8-QD3W residential inverter air-conditioner series covered by the linked official service manual
  3. 3
    Confirm that the observed condition matches the published meaning: IPM malfunction or IGBT over-current protection
  4. 4
    Published check — Stop repeated testing, record PC 00 and the full model number, and arrange Midea service
  5. 5
    Published check — do not open fixed panels or test live circuits
  6. 6
    Stop at the published service boundary after these actions
  7. 7
    do not add a restart or test cycle that Midea does not specify for PC 00
  8. 8
    Published check — Give service the PC 00 photo, full model and serial number, when it appeared, and the result of every published external check
  9. 9
    Stop at the published service boundary after these actions; do not add a restart or test cycle that Midea does not specify for PC 00

Service-safe actions

  1. 1
    Stop repeated testing, record PC 00 and the full model number, and arrange Midea service
  2. 2
    do not open fixed panels or test live circuits
  3. 3
    Give service the PC 00 photo, full model and serial number, when it appeared, and the result of every published external check

Repair planning

€Cost for the first check
PC 00 cost planning: The source-listed safety check is usually €0. €140–€320 is a typical Europe planning range for diagnosis before parts; it is not Midea pricing. Ask for separate diagnosis, parts, labor, and call-out lines on the quote.
⏱Time for the first check
PC 00 time plan: 5–10 minutes to document and isolate safely; 30–90 minutes is a typical diagnostic visit before any model-specific repair.
🔧Tools
Phone camera for the complete PC 00 display, Full model and serial number, Power or water isolation access as described by the official procedure
▣Parts or consumables
PC 00 parts decision: No component should be ordered from PC 00 alone. The documented fault area is “IPM malfunction or IGBT over-current protection”; the technician must identify the failed model-specific part and revision.

What not to do

  • Do not open fixed panels, test live circuits, bypass protection, or keep operating the appliance after an urgent stop instruction
  • Do not run an extra test cycle after the source tells you to stop or arrange service for PC 00

Preventive maintenance

  • 1
    Follow the exact Midea maintenance schedule for the air conditioner and keep the model, serial number, and service history available
  • 2
    If PC 00 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does PC 00 identify?

Midea identifies it as IPM malfunction or IGBT over-current protection.

Which action is actually supported for PC 00?

Stop repeated testing, record PC 00 and the full model number, and arrange Midea service; do not open fixed panels or test live circuits; Give service the PC 00 photo, full model and serial number, when it appeared, and the result of every published external check.

Can I run another test after PC 00?

Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.

Does PC 00 prove which part failed?

No. It identifies “IPM malfunction or IGBT over-current protection”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The PC 00 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.