Midea · Freezer · Indicator guide

Midea Freezer Both flashing - temperature error

IndicatorBoth flashing - temperature

Both flashing - temperature is identified by Midea support as temperature-sensor fault. Follow the official, model-scoped checks and service boundary below.

Quick answer

What Both flashing - temperature means

Midea Freezer Both flashing - temperature: temperature-sensor fault. This interpretation applies to Midea MRU21B2ASL freezer covered by the linked official manual in Canada / English manual.

Model scope
Midea MRU21B2ASL freezer covered by the linked official manual
Region
Canada / English manual
Verified
✓

Primary evidence: Midea MRU21B2ASL official freezer manual.

Open official source ↗
✓
What the code means

temperature-sensor fault

Isolate the appliance when safe. Stop repeated testing, record Both flashing - temperature and the full model number, and arrange Midea service; do not open fixed panels or test live circuits. Do not open fixed panels or test live circuits.

Typical symptoms

01Both flashing - temperature is shown on the Midea freezer display, indicator, or connected app
02The published condition is: temperature-sensor fault
03The control cannot confirm the documented measured condition or sensor reference represented by Both flashing - temperature
04The important observation is when Both flashing - temperature appears and whether the exact published action changes that condition

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — temperature-sensor fault
02Both flashing - temperature identifies a measured-condition or sensor path, not a completed proof that the sensor itself failed
03Model boundary — apply this interpretation only to Midea MRU21B2ASL freezer covered by the linked official manual

Safe next steps

  1. 1
    Confirm the exact Midea Freezer Both flashing - temperature model and displayed code before taking action.
  2. 2
    Keep the appliance in a safe state and use only the external checks named in the official source.
  3. 3
    If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.

Step-by-step diagnosis

  1. 1
    Photograph the complete Both flashing - temperature display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: Midea MRU21B2ASL freezer covered by the linked official manual
  3. 3
    Confirm that the observed condition matches the published meaning: temperature-sensor fault
  4. 4
    Published check — Stop repeated testing, record Both flashing - temperature and the full model number, and arrange Midea service
  5. 5
    Published check — do not open fixed panels or test live circuits
  6. 6
    Stop at the published service boundary after these actions
  7. 7
    do not add a restart or test cycle that Midea does not specify for Both flashing - temperature
  8. 8
    Published check — Give service the Both flashing - temperature photo, full model and serial number, when it appeared, and the result of every published external check
  9. 9
    Stop at the published service boundary after these actions; do not add a restart or test cycle that Midea does not specify for Both flashing - temperature

What to do

  1. 1
    Stop repeated testing, record Both flashing - temperature and the full model number, and arrange Midea service
  2. 2
    do not open fixed panels or test live circuits
  3. 3
    Give service the Both flashing - temperature photo, full model and serial number, when it appeared, and the result of every published external check

Action details

€Cost for the first check
Both flashing - temperature cost planning: The source-listed external check costs €0. A qualified sensor-system diagnosis is generally planned within €110–€250 before any model-specific part is approved.
⏱Time for the first check
Both flashing - temperature time plan: 10–20 minutes for the documented Both flashing - temperature external check; allow 30–90 minutes for measured sensor, wiring, and control diagnosis.
🔧Tools
Photo of the complete Both flashing - temperature display, Full model and serial number, The exact-model manual for the published external check, No live sensor-circuit test equipment
▣Parts or consumables
Both flashing - temperature parts decision: Both flashing - temperature describes temperature-sensor fault; it does not prove the sensor itself has failed. A blocked path, connector, wiring, control input, or the measured condition can produce the same reported area.

What not to do

  • Do not bridge, heat, cool, wet, or electrically probe a sensor to clear Both flashing - temperature
  • Do not replace a sensor until its circuit and the condition it measures have been checked
  • Do not run an extra test cycle after the source tells you to stop or arrange service for Both flashing - temperature

Preventive maintenance

  • 1
    Follow the exact Midea maintenance schedule for the freezer and keep the model, serial number, and service history available
  • 2
    If Both flashing - temperature begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does Both flashing - temperature identify?

Midea identifies it as temperature-sensor fault.

Which action is actually supported for Both flashing - temperature?

Stop repeated testing, record Both flashing - temperature and the full model number, and arrange Midea service; do not open fixed panels or test live circuits; Give service the Both flashing - temperature photo, full model and serial number, when it appeared, and the result of every published external check.

Can I run another test after Both flashing - temperature?

Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.

Does Both flashing - temperature prove which part failed?

No. It identifies “temperature-sensor fault”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The Both flashing - temperature photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.