Miele · Coffee machine · Fault guide

Miele Coffee machine F307 error

ErrorF307

F307 is identified by Miele's official manual as the milk valve is faulty and must be removed and cleaned. Follow the exact model-scoped checks and safety boundary below.

Quick answer

What F307 means

Miele Coffee machine F307: the milk valve is faulty and must be removed and cleaned. This interpretation applies to Miele CVA 7845 built-in coffee machine covered by operating instructions 00_C7F13838022E1FD080959FE8EA0C0684 in United Kingdom / English.

Model scope
Miele CVA 7845 built-in coffee machine covered by operating instructions 00_C7F13838022E1FD080959FE8EA0C0684
Region
United Kingdom / English
Verified
✓

Primary evidence: Miele official built-in coffee-machine operating instructions.

Open official source ↗
✓
What the code means

the milk valve is faulty and must be removed and cleaned

Follow the exact model manual. Remove and clean the milk valve only by following Miele's cleaning-and-care procedure, then refit it. Stop and contact Miele Service if the message returns. Do not open fixed panels or test live circuits.

Typical symptoms

01F307 is shown on the Miele coffee machine display, indicator, or connected app
02The published condition is: the milk valve is faulty and must be removed and cleaned
03The affected function behaves as described by the manufacturer while F307 is present
04The important observation is when F307 appears and whether the exact published action changes that condition

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — the milk valve is faulty and must be removed and cleaned
02F307 identifies the documented condition, not a confirmed replacement part
03Model boundary — apply this interpretation only to Miele CVA 7845 built-in coffee machine covered by operating instructions 00_C7F13838022E1FD080959FE8EA0C0684

Safe next steps

  1. 1
    Confirm the exact Miele Coffee machine F307 model and displayed code before changing settings.
  2. 2
    Complete only the user-accessible checks described in the linked official source.
  3. 3
    Run one controlled test after the check; if the code returns, stop and use the model manual or qualified service.

Step-by-step diagnosis

  1. 1
    Photograph the complete F307 display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: Miele CVA 7845 built-in coffee machine covered by operating instructions 00_C7F13838022E1FD080959FE8EA0C0684
  3. 3
    Confirm that the observed condition matches the published meaning: the milk valve is faulty and must be removed and cleaned
  4. 4
    Published check — Remove and clean the milk valve only by following Miele's cleaning-and-care procedure, then refit it
  5. 5
    Published check — Stop and contact Miele Service if the message returns
  6. 6
    Stop at the published service boundary after these actions
  7. 7
    do not add a restart or test cycle that Miele does not specify for F307
  8. 8
    Published check — Give service the F307 photo, full model and serial number, when it appeared, and the result of every published external check
  9. 9
    Stop at the published service boundary after these actions; do not add a restart or test cycle that Miele does not specify for F307

Evidence-backed actions

  1. 1
    Remove and clean the milk valve only by following Miele's cleaning-and-care procedure, then refit it
  2. 2
    Stop and contact Miele Service if the message returns
  3. 3
    Give service the F307 photo, full model and serial number, when it appeared, and the result of every published external check

Repair planning

€Cost for the first check
F307 cost planning: €0 for the published external correction. If F307 returns afterward, €60–€140 is a typical Europe planning range for diagnosis before parts; it is not Miele pricing.
⏱Time for the first check
F307 time plan: 10–25 minutes for the published external check and one controlled test.
🔧Tools
Exact Miele model instructions, Only the ordinary hand-access items explicitly named in the published check
▣Parts or consumables
F307 parts decision: None for the first external correction. If F307 returns, select a part only after the documented “the milk valve is faulty and must be removed and cleaned” condition is diagnosed on the full model.

What not to do

  • Do not improvise a component test, force a cover, or repeat the cycle after the same code returns
  • Do not run an extra test cycle after the source tells you to stop or arrange service for F307

Preventive maintenance

  • 1
    Follow the exact Miele maintenance schedule for the coffee machine and keep the model, serial number, and service history available
  • 2
    If F307 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does F307 identify?

Miele identifies it as the milk valve is faulty and must be removed and cleaned.

Which action is actually supported for F307?

Remove and clean the milk valve only by following Miele's cleaning-and-care procedure, then refit it; Stop and contact Miele Service if the message returns; Give service the F307 photo, full model and serial number, when it appeared, and the result of every published external check.

Can I run another test after F307?

Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.

Does F307 prove which part failed?

No. It identifies “the milk valve is faulty and must be removed and cleaned”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The F307 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.