Miele · Dishwasher · Fault guide

Miele Dishwasher F446 error

ErrorF446

F446 is identified by Miele's official manual as the door lock is defective. Follow the exact model-scoped checks and safety boundary below.

Quick answer

What F446 means

Miele Dishwasher F446: the door lock is defective. This interpretation applies to Miele PFD 402-407 commercial dishwasher models covered by official operating instructions 00_96106053F20B1EDD98B149F9F4BD8C38 in United Kingdom / English.

Model scope
Miele PFD 402-407 commercial dishwasher models covered by official operating instructions 00_96106053F20B1EDD98B149F9F4BD8C38
Region
United Kingdom / English
Verified
✓

Primary evidence: Miele official commercial dishwasher operating instructions PFD 402-407.

Open official source ↗
✓
What the code means

the door lock is defective

Isolate the appliance when safe. Do not force or bypass the door lock. Stop using the dishwasher and contact Miele Customer Service. Do not open fixed panels or test live circuits.

Typical symptoms

01F446 is shown on the Miele dishwasher display, indicator, or connected app
02The published condition is: the door lock is defective
03The appliance cannot confirm the documented door, lid, latch, or lock state
04The important observation is when F446 appears and whether the exact published action changes that condition

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — the door lock is defective
02F446 does not distinguish an obstruction, seal position, latch, lock, wiring, or control until the external closure checks are complete
03Model boundary — apply this interpretation only to Miele PFD 402-407 commercial dishwasher models covered by official operating instructions 00_96106053F20B1EDD98B149F9F4BD8C38

Safe next steps

  1. 1
    Confirm the exact Miele Dishwasher F446 model and displayed code before taking action.
  2. 2
    Keep the appliance in a safe state and use only the external checks named in the official source.
  3. 3
    If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.

Step-by-step diagnosis

  1. 1
    Photograph the complete F446 display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: Miele PFD 402-407 commercial dishwasher models covered by official operating instructions 00_96106053F20B1EDD98B149F9F4BD8C38
  3. 3
    Confirm that the observed condition matches the published meaning: the door lock is defective
  4. 4
    Published check — Do not force or bypass the door lock
  5. 5
    Published check — Stop using the dishwasher and contact Miele Customer Service
  6. 6
    Stop at the published service boundary after these actions
  7. 7
    do not add a restart or test cycle that Miele does not specify for F446
  8. 8
    Published check — Give service the F446 photo, full model and serial number, when it appeared, and the result of every published external check
  9. 9
    Stop at the published service boundary after these actions; do not add a restart or test cycle that Miele does not specify for F446

Service-safe actions

  1. 1
    Do not force or bypass the door lock
  2. 2
    Stop using the dishwasher and contact Miele Customer Service
  3. 3
    Give service the F446 photo, full model and serial number, when it appeared, and the result of every published external check

Repair planning

€Cost for the first check
F446 cost planning: €0 for cleaning and reseating checks; a confirmed latch or seal commonly costs €20–€100 before labor. If F446 remains, €90–€220 is a typical Europe planning range for diagnosis before parts; it is not Miele pricing.
⏱Time for the first check
F446 time plan: 5–15 minutes for an external closure check and one controlled start attempt.
🔧Tools
Flashlight, Soft cloth for the user-accessible seal and latch area, No tool for forcing the lock
▣Parts or consumables
F446 parts decision: None until obstruction, loading, and seal position are excluded. A latch, lock, or seal must be confirmed against the full Miele model before ordering.

What not to do

  • Do not slam the door or lid, force the latch, bypass the interlock, or test the lock with power connected
  • Do not run an extra test cycle after the source tells you to stop or arrange service for F446

Preventive maintenance

  • 1
    Keep the seal and latch area clean, remove trapped items before closing, and never use the door or lid to compress an oversized load
  • 2
    If F446 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does F446 identify?

Miele identifies it as the door lock is defective.

Which action is actually supported for F446?

Do not force or bypass the door lock; Stop using the dishwasher and contact Miele Customer Service; Give service the F446 photo, full model and serial number, when it appeared, and the result of every published external check.

Can I run another test after F446?

Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.

Does F446 prove which part failed?

No. It identifies “the door lock is defective”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The F446 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.