Miele Dishwasher F601 error
F601 is identified by Miele's official, appliance-specific source as AutoDos automatic-dispensing fault. Follow only the model-scoped checks and safety boundary below.
What F601 means
Miele Dishwasher F601: AutoDos automatic-dispensing fault. This interpretation applies to Miele dishwasher models covered by official operating instructions 00_C7F13838121A1EEEBDC75707B637C838 in United Kingdom / English.
- Model scope
- Miele dishwasher models covered by official operating instructions 00_C7F13838121A1EEEBDC75707B637C838
- Region
- United Kingdom / English
- Verified
AutoDos automatic-dispensing fault
Switch the dishwasher off and back on, check that the PowerDisk holder and PowerDisk are fitted correctly, then activate AutoDos and run the programme again. If the fault returns, deactivate automatic dispensing, use the detergent compartment, and contact Miele Customer Service. Stop if there is water, heat, smoke, a burning smell, or unsafe electrical behavior. Do not open fixed panels or test live circuits.
Typical symptoms
Fault area and what the code does not prove
Separate the manufacturer-defined condition from components that still need exact-model diagnosis.
Safe next steps
- 1Confirm the exact Miele Dishwasher F601 model and displayed code before changing settings.
- 2Complete only the user-accessible checks described in the linked official source.
- 3Run one controlled test after the check; if the code returns, stop and use the model manual or qualified service.
Step-by-step diagnosis
- 1Photograph the complete F601 display before changing controls or removing power
- 2Confirm that the full model number is covered by this scope: Miele dishwasher models covered by official operating instructions 00_C7F13838121A1EEEBDC75707B637C838
- 3Confirm that the observed condition matches the published meaning: AutoDos automatic-dispensing fault
- 4Published check — Switch the dishwasher off and back on, check that the PowerDisk holder and PowerDisk are fitted correctly, then activate AutoDos and run the programme again
- 5Published check — If the fault returns, deactivate automatic dispensing, use the detergent compartment, and contact Miele Customer Service
- 6Stop at the published service boundary after these actions
- 7do not add a restart or test cycle that Miele does not specify for F601
- 8Published check — Give service the F601 photo, full model and serial number, when it appeared, and the result of every published external check
- 9Stop at the published service boundary after these actions; do not add a restart or test cycle that Miele does not specify for F601
Evidence-backed actions
- 1Switch the dishwasher off and back on, check that the PowerDisk holder and PowerDisk are fitted correctly, then activate AutoDos and run the programme again
- 2If the fault returns, deactivate automatic dispensing, use the detergent compartment, and contact Miele Customer Service
- 3Give service the F601 photo, full model and serial number, when it appeared, and the result of every published external check
Repair planning
F601 cost planning: Typically €5–€25 for the correct consumable; the setting or refill check itself has no labor cost.
F601 time plan: 5–15 minutes to verify the level, refill correctly, clean spills, and confirm the indicator response.
Dry scoop or funnel suitable for the specified consumable, Soft cloth for spills, Exact-model fill-level instructions
F601 parts decision: Use only the salt, detergent, rinse aid, or other consumable specified for this Miele model; F601 does not confirm an internal part.
What not to do
- Do not mix household chemicals, overfill the reservoir, substitute table salt, or change hardness/dosing settings without the exact-model instructions
- Do not run an extra test cycle after the source tells you to stop or arrange service for F601
Preventive maintenance
- 1Follow the exact Miele maintenance schedule for the dishwasher and keep the model, serial number, and service history available
- 2If F601 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis
Frequently asked questions
What exactly does F601 identify?
Miele identifies it as AutoDos automatic-dispensing fault.
Which action is actually supported for F601?
Switch the dishwasher off and back on, check that the PowerDisk holder and PowerDisk are fitted correctly, then activate AutoDos and run the programme again; If the fault returns, deactivate automatic dispensing, use the detergent compartment, and contact Miele Customer Service; Give service the F601 photo, full model and serial number, when it appeared, and the result of every published external check.
Can I run another test after F601?
Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.
Does F601 prove which part failed?
No. It identifies “AutoDos automatic-dispensing fault”; parts are selected only after the exact model and failed function are confirmed.
What information should accompany a service request?
The F601 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.
Did this guide fix your appliance?
Your anonymous response helps us show which repairs work in the real world. One current response is kept per guide.