Miele · Washing machine · Fault guide

Miele Washing machine F64 error

ErrorF64

F64 is identified by Miele's official manual as magnetic-field-sensor fault. Follow the exact model-scoped checks and safety boundary below.

Quick answer

What F64 means

Miele Washing machine F64: magnetic-field-sensor fault. This interpretation applies to Miele washing-machine and washer-dryer models covered by the linked Miele USA fault F64 support article in United States / English.

Model scope
Miele washing-machine and washer-dryer models covered by the linked Miele USA fault F64 support article
Region
United States / English
Verified
✓

Primary evidence: Miele USA official washing-machine fault F64 support.

Open official source ↗
✓
What the code means

magnetic-field-sensor fault

Isolate the appliance when safe. Do not work on live or pressurised systems.

Typical symptoms

01F64 is shown on the Miele washing machine display, indicator, or connected app
02The published condition is: magnetic-field-sensor fault
03The control cannot confirm the documented measured condition or sensor reference represented by F64
04The important observation is when F64 appears and whether the exact published action changes that condition

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — magnetic-field-sensor fault
02F64 identifies a measured-condition or sensor path, not a completed proof that the sensor itself failed
03Model boundary — apply this interpretation only to Miele washing-machine and washer-dryer models covered by the linked Miele USA fault F64 support article

Safe next steps

  1. 1
    Confirm the exact Miele Washing machine F64 model and displayed code before taking action.
  2. 2
    Keep the appliance in a safe state and use only the external checks named in the official source.
  3. 3
    If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.

Step-by-step diagnosis

  1. 1
    Photograph the complete F64 display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: Miele washing-machine and washer-dryer models covered by the linked Miele USA fault F64 support article
  3. 3
    Confirm that the observed condition matches the published meaning: magnetic-field-sensor fault
  4. 4
    Published check — Stop using the washing machine and contact Miele Service for model-specific diagnosis
  5. 5
    Published check — do not open or test the sensor circuit
  6. 6
    Stop at the published service boundary after these actions
  7. 7
    do not add a restart or test cycle that Miele does not specify for F64
  8. 8
    Published check — Give service the F64 photo, full model and serial number, when it appeared, and the result of every published external check
  9. 9
    Stop at the published service boundary after these actions; do not add a restart or test cycle that Miele does not specify for F64

Service-safe actions

  1. 1
    Stop using the washing machine and contact Miele Service for model-specific diagnosis
  2. 2
    do not open or test the sensor circuit
  3. 3
    Give service the F64 photo, full model and serial number, when it appeared, and the result of every published external check

Repair planning

€Cost for the first check
F64 cost planning: The source-listed external check costs €0. A qualified sensor-system diagnosis is generally planned within €90–€220 before any model-specific part is approved.
⏱Time for the first check
F64 time plan: 10–20 minutes for the documented F64 external check; allow 30–90 minutes for measured sensor, wiring, and control diagnosis.
🔧Tools
Photo of the complete F64 display, Full model and serial number, The exact-model manual for the published external check, No live sensor-circuit test equipment
▣Parts or consumables
F64 parts decision: F64 describes magnetic-field-sensor fault; it does not prove the sensor itself has failed. A blocked path, connector, wiring, control input, or the measured condition can produce the same reported area.

What not to do

  • Do not bridge, heat, cool, wet, or electrically probe a sensor to clear F64
  • Do not replace a sensor until its circuit and the condition it measures have been checked
  • Do not run an extra test cycle after the source tells you to stop or arrange service for F64

Preventive maintenance

  • 1
    Follow the exact Miele maintenance schedule for the washing machine and keep the model, serial number, and service history available
  • 2
    If F64 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does F64 identify?

Miele identifies it as magnetic-field-sensor fault.

Which action is actually supported for F64?

Stop using the washing machine and contact Miele Service for model-specific diagnosis; do not open or test the sensor circuit; Give service the F64 photo, full model and serial number, when it appeared, and the result of every published external check.

Can I run another test after F64?

Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.

Does F64 prove which part failed?

No. It identifies “magnetic-field-sensor fault”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The F64 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.