Nespresso Lattissima Premium all buttons flashing during reset
ErrorAll buttons flashing — Lattissima Premium reset
Official Nespresso guidance for Nespresso Lattissima Premium machines covered by the Spain support entry explains the Lattissima Premium buttons flash after the milk and hot-water reset command. The behavior is model-specific and should not be merged with another Nespresso machine family.
What the code means
The Premium model is confirming its beverage-program reset
Hot water and steam can burn. Allow the nozzle or milk unit to cool before disconnecting.
Typical symptoms
01The Nespresso Lattissima Premium machines covered by the Spain support entry shows the Lattissima Premium buttons flash after the milk and hot-water reset command
02Brewing, heating, frothing, or pairing does not behave normally
03The behavior returns when the same model-specific condition is present
Likely causes
Start with the least invasive explanation and stop if the check requires internal electrical or sealed-system access.
01The Premium model is confirming its beverage-program reset
02The hot-water nozzle or milk unit was disconnected and the two-button reset was held
03The exact model procedure or operating state is still active
Safe next steps
- 1Confirm the model is Lattissima Premium
- 2Turn the machine on and remove the hot-water nozzle or milk froth unit
- 3Press Milk and Water together for at least five seconds
- 4Wait for the flashing confirmation
- 5Reconnect the unit and run one recipe test
Step-by-step repair
- 1This is a model-specific programming reset. Do not treat the flashing confirmation as a board fault.
Repair details
€Estimated cost
The reset has no part cost. A machine that will not return to ready state needs Nespresso support.
The reset has no part cost. A machine that will not return to ready state needs Nespresso support.
⏱Estimated time
Allow about 5–10 minutes for reset and reconnection.
Allow about 5–10 minutes for reset and reconnection.
🔧Tools
No electrical tool is required, Exact Lattissima Premium controls
No electrical tool is required, Exact Lattissima Premium controls
▣Spare parts
No replacement part is indicated by the reset confirmation.
No replacement part is indicated by the reset confirmation.
What not to do
- Do not use the Plus or Original Lattissima sequence
- Do not force the nozzle
- Do not open the milk or control system
Preventive maintenance
- 1Keep the milk and hot-water connectors clean and reassemble them fully after each cleaning.
Frequently asked questions
What is the Premium reset sequence?
Nespresso specifies disconnecting the nozzle/unit and holding Milk and Water for at least five seconds.
What if it fails?
Contact Nespresso with the exact model.
Did this fix your appliance?
Your anonymous response helps us show which repairs work in the real world.