Nespresso Vertuo Next orange blink: eject previous capsule
ErrorOrange blink — previous capsule
Official Nespresso guidance for Nespresso Vertuo Next machines covered by the New Zealand support entry explains the machine blinks and will not brew a second capsule. The behavior is model-specific and should not be merged with another Nespresso machine family.
What the code means
The previous capsule has not been ejected before the next brew
The capsule and brewing head may be hot. Wait before handling and never use sharp tools inside the head.
Typical symptoms
01The Nespresso Vertuo Next machines covered by the New Zealand support entry shows the machine blinks and will not brew a second capsule
02Brewing, heating, frothing, or pairing does not behave normally
03The behavior returns when the same model-specific condition is present
Likely causes
Start with the least invasive explanation and stop if the check requires internal electrical or sealed-system access.
01The previous capsule has not been ejected before the next brew
02The used-capsule container or brewing chamber still contains the prior capsule
03The exact model procedure or operating state is still active
Safe next steps
- 1Open the head and confirm the previous capsule is ejected
- 2Empty the used-capsule container if it is full
- 3Close and lock the head
- 4Insert the next capsule and test once
- 5Contact Nespresso if a capsule cannot eject normally
Step-by-step repair
- 1This is an operating-state check, not a verified component repair. A capsule that remains trapped needs Nespresso service for the exact model.
Repair details
€Estimated cost
The published correction normally has no cost. Obtain a service quote only if the capsule-ejection mechanism remains stuck.
The published correction normally has no cost. Obtain a service quote only if the capsule-ejection mechanism remains stuck.
⏱Estimated time
Allow about 2–5 minutes for ejection, container emptying, and one test.
Allow about 2–5 minutes for ejection, container emptying, and one test.
🔧Tools
No electrical tool is required, A soft cloth for accessible residue
No electrical tool is required, A soft cloth for accessible residue
▣Spare parts
No replacement part is indicated by a previous-capsule alert.
No replacement part is indicated by a previous-capsule alert.
What not to do
- Do not pry a stuck capsule with a knife or screwdriver
- Do not force the head closed
- Do not treat this behavior as a pump or barcode-reader failure without the model checks
Preventive maintenance
- 1Empty the used-capsule container before it becomes full and remove capsules after brewing.
Frequently asked questions
Why must the previous capsule be ejected?
Nespresso says Vertuo Next requires ejection before the next cup.
Can I top up coffee?
Press the coffee button again within 30 seconds as described by Nespresso.
Did this fix your appliance?
Your anonymous response helps us show which repairs work in the real world.