iRobot robot vacuum Charging Error 104 error
Charging Error 104 is identified by iRobot support as no electrical current is reaching the robot. Follow the model-scoped external checks and service boundary below.
What Charging Error 104 means
iRobot Robot vacuum Charging Error 104: No electrical current is reaching the robot. This interpretation applies to Roomba models covered by the official iRobot Charging Error Chart 19598 in Global / English.
- Model scope
- Roomba models covered by the official iRobot Charging Error Chart 19598
- Region
- Global / English
- Verified
No electrical current is reaching the robot
Follow the exact model manual. Secure the dock plug at the outlet and dock, clean the dock and robot charging contacts, and reinstall the authentic battery if the error remains. Do not open fixed panels or test live circuits.
Typical symptoms
Fault area and what the code does not prove
Separate the manufacturer-defined condition from components that still need exact-model diagnosis.
Safe next steps
- 1Confirm the exact iRobot Robot vacuum Charging Error 104 model and displayed code before changing settings.
- 2Complete only the user-accessible checks described in the linked official source.
- 3Run one controlled test after the check; if the code returns, stop and use the model manual or qualified service.
Step-by-step diagnosis
- 1Photograph the complete Charging Error 104 display before changing controls or removing power
- 2Confirm that the full model number is covered by this scope: Roomba models covered by the official iRobot Charging Error Chart 19598
- 3Confirm that the observed condition matches the published meaning: No electrical current is reaching the robot
- 4Published check — Secure the dock plug at the outlet and dock, clean the dock and robot charging contacts, and reinstall the authentic battery if the error remains
- 5Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check; if Charging Error 104 remains, stop and move to exact-model diagnosis
Evidence-backed actions
- 1Secure the dock plug at the outlet and dock, clean the dock and robot charging contacts, and reinstall the authentic battery if the error remains
- 2If Charging Error 104 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis
Repair planning
Charging Error 104 cost planning: €0 for cleaning, reseating, or temperature recovery; an exact-model battery commonly costs €35–€130. Charging-board or dock diagnosis is commonly €60–€140 before parts.
Charging Error 104 time plan: 10–20 minutes for dry contact, seating, and connection checks; add the manufacturer-specified cooling or charging wait before retesting.
Dry microfiber cloth for charging contacts, Exact-model battery removal instructions, No live electrical test equipment
Charging Error 104 parts decision: Use only the exact-model battery or charging accessory approved by iRobot, and only when the published procedure or a confirmed diagnosis requires replacement.
What not to do
- Do not charge a wet, swollen, damaged, very hot, or very cold battery
- Do not substitute an unapproved charger or bridge charging contacts
- Do not turn Charging Error 104 into a parts diagnosis; the display identifies a condition, not a completed component test
Preventive maintenance
- 1Keep charging contacts clean and dry, store and charge the battery within the specified temperature range, and use only approved charging accessories
- 2If Charging Error 104 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis
Frequently asked questions
What exactly does Charging Error 104 identify?
iRobot identifies it as No electrical current is reaching the robot.
Which action is actually supported for Charging Error 104?
Secure the dock plug at the outlet and dock, clean the dock and robot charging contacts, and reinstall the authentic battery if the error remains.
What result matters after the Charging Error 104 check?
Whether the documented condition clears after the listed action. If it remains or returns, the exact model needs further diagnosis.
Does Charging Error 104 prove which part failed?
No. It identifies “No electrical current is reaching the robot”; parts are selected only after the exact model and failed function are confirmed.
What information should accompany a service request?
The Charging Error 104 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.
Did this guide fix your appliance?
Your anonymous response helps us show which repairs work in the real world. One current response is kept per guide.