Samsung Air conditioner E231 error
E231 is listed in Samsung's official, model-scoped air-conditioner fault table as outdoor coil temperature sensor error.
Reference source listed as Samsung Mexico official air-conditioner display-code table.
Open official source ↗outdoor coil temperature sensor error
Stop if there is smoke, a burning smell, damaged wiring, repeated breaker operation, or refrigerant leakage. Do not bridge or electrically probe the sensor circuit. Record the displayed code, stop repeated restarts, and contact Samsung Mexico technical support or an authorized service centre for diagnosis.
Typical symptoms
Fault area and what the code does not prove
Separate the manufacturer-defined condition from components that still need exact-model diagnosis.
Safe next steps
- 1Confirm the exact Samsung Air conditioner E231 model and displayed code before taking action.
- 2Keep the appliance in a safe state and use only the external checks named in the official source.
- 3If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.
Step-by-step diagnosis
- 1Photograph the complete E231 display before changing controls or removing power
- 2Confirm that the full model number is covered by this scope: Samsung air conditioners covered by the official Mexico display-code support table
- 3Confirm that the observed condition matches the published meaning: outdoor coil temperature sensor error
- 4Published check — Do not bridge or electrically probe the sensor circuit
- 5Published check — Record the displayed code, stop repeated restarts, and contact Samsung Mexico technical support or an authorized service centre for diagnosis
- 6Stop at the published service boundary after these actions
- 7do not add a restart or test cycle that Samsung does not specify for E231
- 8Published check — Give service the E231 photo, full model and serial number, when it appeared, and the result of every published external check
- 9Stop at the published service boundary after these actions; do not add a restart or test cycle that Samsung does not specify for E231
Service-safe actions
- 1Do not bridge or electrically probe the sensor circuit
- 2Record the displayed code, stop repeated restarts, and contact Samsung Mexico technical support or an authorized service centre for diagnosis
- 3Give service the E231 photo, full model and serial number, when it appeared, and the result of every published external check
Repair planning
E231 cost planning: The source-listed external check costs €0. A qualified sensor-system diagnosis is generally planned within €140–€320 before any model-specific part is approved.
E231 time plan: 10–20 minutes for the documented E231 external check; allow 30–90 minutes for measured sensor, wiring, and control diagnosis.
Photo of the complete E231 display, Full model and serial number, The exact-model manual for the published external check, No live sensor-circuit test equipment
E231 parts decision: E231 describes outdoor coil temperature sensor error; it does not prove the sensor itself has failed. A blocked path, connector, wiring, control input, or the measured condition can produce the same reported area.
What not to do
- Do not bridge, heat, cool, wet, or electrically probe a sensor to clear E231
- Do not replace a sensor until its circuit and the condition it measures have been checked
- Do not run an extra test cycle after the source tells you to stop or arrange service for E231
Preventive maintenance
- 1Follow the exact Samsung maintenance schedule for the air conditioner and keep the model, serial number, and service history available
- 2If E231 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis
Frequently asked questions
What exactly does E231 identify?
Samsung identifies it as outdoor coil temperature sensor error.
Which action is actually supported for E231?
Do not bridge or electrically probe the sensor circuit; Record the displayed code, stop repeated restarts, and contact Samsung Mexico technical support or an authorized service centre for diagnosis; Give service the E231 photo, full model and serial number, when it appeared, and the result of every published external check.
Can I run another test after E231?
Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.
Does E231 prove which part failed?
No. It identifies “outdoor coil temperature sensor error”; parts are selected only after the exact model and failed function are confirmed.
What information should accompany a service request?
The E231 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.
Did this guide fix your appliance?
Your anonymous response helps us show which repairs work in the real world. One current response is kept per guide.