Samsung · Refrigerator · Fault guide

Samsung Refrigerator 14E error

Error14E

14E is identified by Samsung support as an ice-maker sensor error. Follow the official, model-scoped checks and service boundary below.

Quick answer

What 14E means

Samsung Refrigerator 14E: an ice-maker sensor error. This interpretation applies to Samsung refrigerator models covered by the linked US refrigerator error-code article in United States / English.

Model scope
Samsung refrigerator models covered by the linked US refrigerator error-code article
Region
United States / English
Verified
✓

Primary evidence: Samsung US refrigerator error-code support.

Open official source ↗
✓
What the code means

an ice-maker sensor error

Isolate the appliance when safe. Record 14E and the full model number; do not test internal wiring and request Samsung service. Do not open fixed panels or test live circuits.

Typical symptoms

0114E is shown on the Samsung refrigerator display, indicator, or connected app
02The published condition is: an ice-maker sensor error
03The control cannot confirm the documented measured condition or sensor reference represented by 14E
04The important observation is when 14E appears and whether the exact published action changes that condition

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — an ice-maker sensor error
0214E identifies a measured-condition or sensor path, not a completed proof that the sensor itself failed
03Model boundary — apply this interpretation only to Samsung refrigerator models covered by the linked US refrigerator error-code article

Safe next steps

  1. 1
    Confirm the exact Samsung Refrigerator 14E model and displayed code before taking action.
  2. 2
    Keep the appliance in a safe state and use only the external checks named in the official source.
  3. 3
    If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.

Step-by-step diagnosis

  1. 1
    Photograph the complete 14E display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: Samsung refrigerator models covered by the linked US refrigerator error-code article
  3. 3
    Confirm that the observed condition matches the published meaning: an ice-maker sensor error
  4. 4
    Published check — Record 14E and the full model number
  5. 5
    Published check — do not test internal wiring and request Samsung service
  6. 6
    Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check
  7. 7
    if 14E remains, stop and move to exact-model diagnosis
  8. 8
    Published check — If 14E returns after the listed action, do not repeat the same correction indefinitely
  9. 9
    Published check — continue with exact-model diagnosis
  10. 10
    Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check; if 14E remains, stop and move to exact-model diagnosis

Service-safe actions

  1. 1
    Record 14E and the full model number
  2. 2
    do not test internal wiring and request Samsung service
  3. 3
    If 14E returns after the listed action, do not repeat the same correction indefinitely
  4. 4
    continue with exact-model diagnosis
  5. 5
    If 14E returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis

Repair planning

€Cost for the first check
14E cost planning: The source-listed external check costs €0. A qualified sensor-system diagnosis is generally planned within €110–€250 before any model-specific part is approved.
⏱Time for the first check
14E time plan: 10–20 minutes for the documented 14E external check; allow 30–90 minutes for measured sensor, wiring, and control diagnosis.
🔧Tools
Photo of the complete 14E display, Full model and serial number, The exact-model manual for the published external check, No live sensor-circuit test equipment
▣Parts or consumables
14E parts decision: 14E describes an ice-maker sensor error; it does not prove the sensor itself has failed. A blocked path, connector, wiring, control input, or the measured condition can produce the same reported area.

What not to do

  • Do not bridge, heat, cool, wet, or electrically probe a sensor to clear 14E
  • Do not replace a sensor until its circuit and the condition it measures have been checked
  • Do not turn 14E into a parts diagnosis
  • the display identifies a condition, not a completed component test
  • Do not turn 14E into a parts diagnosis; the display identifies a condition, not a completed component test

Preventive maintenance

  • 1
    Follow the exact Samsung maintenance schedule for the refrigerator and keep the model, serial number, and service history available
  • 2
    If 14E begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does 14E identify?

Samsung identifies it as an ice-maker sensor error.

Which action is actually supported for 14E?

Record 14E and the full model number; do not test internal wiring and request Samsung service; If 14E returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis.

What result matters after the 14E check?

Whether the documented condition clears after the listed action. If it remains or returns, the exact model needs further diagnosis.

Does 14E prove which part failed?

No. It identifies “an ice-maker sensor error”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The 14E photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.