Samsung · Refrigerator · Fault guide

Samsung Refrigerator 76C error

Error76C

76C is identified by Samsung support as water is detected in the Autofill compartment. Follow the official, model-scoped checks and service boundary below.

Quick answer

What 76C means

Samsung Refrigerator 76C: water is detected in the Autofill compartment. This interpretation applies to Samsung refrigerator models covered by the linked US refrigerator error-code article in United States / English.

Model scope
Samsung refrigerator models covered by the linked US refrigerator error-code article
Region
United States / English
Verified
✓

Primary evidence: Samsung US refrigerator error-code support.

Open official source ↗
✓
What the code means

water is detected in the Autofill compartment

Isolate the appliance when safe. Stop using the Autofill feature, dry only accessible areas, and request Samsung service if the indicator returns or water is present. Do not open fixed panels or test live circuits.

Typical symptoms

0176C is shown on the Samsung refrigerator display, indicator, or connected app
02The published condition is: water is detected in the Autofill compartment
03The appliance has reached the manufacturer-defined stop or service condition associated with 76C
04The important observation is when 76C appears and whether the exact published action changes that condition

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — water is detected in the Autofill compartment
0276C defines a service boundary; the failed internal part still requires exact-model diagnosis
03Model boundary — apply this interpretation only to Samsung refrigerator models covered by the linked US refrigerator error-code article

Safe next steps

  1. 1
    Confirm the exact Samsung Refrigerator 76C model and displayed code before taking action.
  2. 2
    Keep the appliance in a safe state and use only the external checks named in the official source.
  3. 3
    If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.

Step-by-step diagnosis

  1. 1
    Photograph the complete 76C display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: Samsung refrigerator models covered by the linked US refrigerator error-code article
  3. 3
    Confirm that the observed condition matches the published meaning: water is detected in the Autofill compartment
  4. 4
    Published check — Stop using the Autofill feature, dry only accessible areas, and request Samsung service if the indicator returns or water is present
  5. 5
    Stop at the published service boundary after these actions
  6. 6
    do not add a restart or test cycle that Samsung does not specify for 76C
  7. 7
    Published check — Give service the 76C photo, full model and serial number, when it appeared, and the result of every published external check
  8. 8
    Stop at the published service boundary after these actions; do not add a restart or test cycle that Samsung does not specify for 76C

Service-safe actions

  1. 1
    Stop using the Autofill feature, dry only accessible areas, and request Samsung service if the indicator returns or water is present
  2. 2
    Give service the 76C photo, full model and serial number, when it appeared, and the result of every published external check

Repair planning

€Cost for the first check
76C cost planning: The source-listed safety check is usually €0. €110–€250 is a typical Europe planning range for diagnosis before parts; it is not Samsung pricing. Ask for separate diagnosis, parts, labor, and call-out lines on the quote.
⏱Time for the first check
76C time plan: 5–10 minutes to document and isolate safely; 30–90 minutes is a typical diagnostic visit before any model-specific repair.
🔧Tools
Phone camera for the complete 76C display, Full model and serial number, Power or water isolation access as described by the official procedure
▣Parts or consumables
76C parts decision: No component should be ordered from 76C alone. The documented fault area is “water is detected in the Autofill compartment”; the technician must identify the failed model-specific part and revision.

What not to do

  • Do not open fixed panels, test live circuits, bypass protection, or keep operating the appliance after an urgent stop instruction
  • Do not run an extra test cycle after the source tells you to stop or arrange service for 76C

Preventive maintenance

  • 1
    Follow the exact Samsung maintenance schedule for the refrigerator and keep the model, serial number, and service history available
  • 2
    If 76C begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does 76C identify?

Samsung identifies it as water is detected in the Autofill compartment.

Which action is actually supported for 76C?

Stop using the Autofill feature, dry only accessible areas, and request Samsung service if the indicator returns or water is present; Give service the 76C photo, full model and serial number, when it appeared, and the result of every published external check.

Can I run another test after 76C?

Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.

Does 76C prove which part failed?

No. It identifies “water is detected in the Autofill compartment”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The 76C photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.