Samsung · Washing machine

Samsung washer dS / d5 / FL / LO / L0 / dE / dE1 / dE2 / dC / dC1 / dL / 1 dC code

ErrordS / d5 / FL / LO / L0 / dE / dE1 / dE2 / dC / dC1 / dL / 1 dC

dS / d5 / FL / LO / L0 / dE / dE1 / dE2 / dC / dC1 / dL / 1 dC is listed by Samsung support as door error. Code variants and available checks can differ by model and region.

✓

Reference source listed as Samsung US washing machine information codes.

Open official source ↗

✓

What the code means

Door error

Disconnect power before inspecting hoses or accessible filters, keep hands away from moving parts, and follow the exact Samsung model manual.

Typical symptoms

01dS / d5 / FL / LO / L0 / dE / dE1 / dE2 / dC / dC1 / dL / 1 dC appears on the display

02The current cycle may pause or stop

03The affected fill, drain, door, power, or balance function may not complete

Likely causes

Start with the least invasive explanation and stop if the check requires internal electrical or sealed-system access.

01Laundry or debris preventing the door from closing

02Damaged latch, door alignment, or door-sensor condition

Safe next steps

1
Check that the door latch is securely fixed
2
Remove laundry or other objects caught in the door
3
Close and secure the door correctly
4
Contact Samsung service if the code remains or the door or latch is damaged

Step-by-step repair

1
Remove only laundry or objects trapped at the door
2
Close the door without forcing the latch
3
Run one controlled restart
4
Stop and arrange service if the door cannot close or lock securely

Repair details

🔧Tools
No tool is required for Samsung's official external door check

What not to do

Do not force a damaged latch
Do not bypass or bridge the door lock
Do not use the washer with a door that cannot close securely

Preventive maintenance

1
Check the door seal for trapped items before starting a cycle
2
Keep the latch area clean and dry

Frequently asked questions

What do these door codes indicate?

Samsung says the door is not detected as closed and locked.

What about bare dC?

On some models dC instead means an unbalanced load, so check the exact model manual before using a door procedure.

Did this fix your appliance?

Your anonymous response helps us show which repairs work in the real world.