Vaillant · Heat pump · Fault guide

Vaillant Heat pump F.1119 error

ErrorF.1119

F.1119 is identified by Vaillant support as compressor inrush-current limiter fault. Follow the official, model-scoped checks and service boundary below.

Quick answer

What F.1119 means

Vaillant Heat pump F.1119: compressor inrush-current limiter fault. This interpretation applies to Vaillant heat-pump models covered by the linked official UK heat-pump fault-code page in United Kingdom / English.

Model scope
Vaillant heat-pump models covered by the linked official UK heat-pump fault-code page
Region
United Kingdom / English
Verified
✓

Primary evidence: Vaillant UK official heat-pump fault-code support.

Open official source ↗
!
Stop and make safe

compressor inrush-current limiter fault

Isolate the appliance when safe. Contact a qualified heating installer or Vaillant engineer for mains, harness, compressor, and current-limiter diagnosis; do not open the casing. Do not open fixed panels or test live circuits.

Typical symptoms

01F.1119 is shown on the Vaillant heat pump display, indicator, or connected app
02The published condition is: compressor inrush-current limiter fault
03The appliance has reached the manufacturer-defined stop or service condition associated with F.1119
04The important observation is when F.1119 appears and whether the exact published action changes that condition

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — compressor inrush-current limiter fault
02F.1119 defines a service boundary; the failed internal part still requires exact-model diagnosis
03Model boundary — apply this interpretation only to Vaillant heat-pump models covered by the linked official UK heat-pump fault-code page

Safe next steps

  1. 1
    Confirm the exact Vaillant Heat pump F.1119 model and displayed code before taking action.
  2. 2
    Keep the appliance in a safe state and use only the external checks named in the official source.
  3. 3
    If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.

Step-by-step diagnosis

  1. 1
    Photograph the complete F.1119 display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: Vaillant heat-pump models covered by the linked official UK heat-pump fault-code page
  3. 3
    Confirm that the observed condition matches the published meaning: compressor inrush-current limiter fault
  4. 4
    Published check — Contact a qualified heating installer or Vaillant engineer for mains, harness, compressor, and current-limiter diagnosis
  5. 5
    Published check — do not open the casing
  6. 6
    Stop at the published service boundary after these actions
  7. 7
    do not add a restart or test cycle that Vaillant does not specify for F.1119
  8. 8
    Published check — Give service the F.1119 photo, full model and serial number, when it appeared, and the result of every published external check
  9. 9
    Stop at the published service boundary after these actions; do not add a restart or test cycle that Vaillant does not specify for F.1119

Service-safe actions

  1. 1
    Contact a qualified heating installer or Vaillant engineer for mains, harness, compressor, and current-limiter diagnosis
  2. 2
    do not open the casing
  3. 3
    Give service the F.1119 photo, full model and serial number, when it appeared, and the result of every published external check

Repair planning

€Cost for the first check
F.1119 cost planning: €0 for the published breaker, plug, or power-restoration check. If the household supply or appliance wiring needs diagnosis, €140–€320 is a typical Europe planning range for diagnosis before parts; it is not Vaillant pricing.
⏱Time for the first check
F.1119 time plan: 5–15 minutes to document F.1119 and complete the published power check; allow 30–90 minutes for a qualified supply or appliance diagnosis.
🔧Tools
Phone photo of the complete F.1119 display, Full model and serial number, Access to the household breaker or plug only as the official instructions permit, No live-voltage test equipment for an owner check
▣Parts or consumables
F.1119 parts decision: F.1119 documents compressor inrush-current limiter fault. It does not by itself distinguish the appliance, cord, outlet, breaker, or installation wiring as the failed item; a qualified electrical check must locate the fault before parts are ordered.

What not to do

  • Do not use an extension lead, bypass a tripping breaker, open a plug or control enclosure, or measure live mains voltage
  • Stop immediately if F.1119 follows heat, arcing, smoke, or a burning smell
  • Do not run an extra test cycle after the source tells you to stop or arrange service for F.1119

Preventive maintenance

  • 1
    Follow the exact Vaillant maintenance schedule for the heat pump and keep the model, serial number, and service history available
  • 2
    If F.1119 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does F.1119 identify?

Vaillant identifies it as compressor inrush-current limiter fault.

Which action is actually supported for F.1119?

Contact a qualified heating installer or Vaillant engineer for mains, harness, compressor, and current-limiter diagnosis; do not open the casing; Give service the F.1119 photo, full model and serial number, when it appeared, and the result of every published external check.

Can I run another test after F.1119?

Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.

Does F.1119 prove which part failed?

No. It identifies “compressor inrush-current limiter fault”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The F.1119 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.